Electric Driven Boost Compressor

Brand: HES Energy Systems
Product Code: 3271531

Qty: - +
   - OR -   

Electric Driven Boost Compressor System for filling 300 bar pressure cylinders. This compressor is compatible with the Ultralight Two-Step Pressure Regulator and light weight hydrogen gas cylinders for Unmanned Aerial Vehicles (UAVs) such as the Ultra-Light Composite Storage Cylinders (E-Series).

Features Include:
✔ Rated up to 300 bar (4,350 PSI)
✔ Compress industrial hydrogen gas to high pressure for maximum endurance and fuel cell electric UAVs
✔ All items are mounted on a tubular frame and control panel with gauges and valves panel mounted
✔ Automatic stop & restart high limit switch factory set at 300 bar (adjustable)
✔ Automatic stop & restart low limit switch factory set at 35 bar (adjustable)
✔ Manual start / stop switch
✔ Safety relief valve set at 317 bar (adjustable)
✔ Inlet / Outlet gauges dual scale, Inlet / Outlet filters (5-micron), Outlet shutoff valve (needle type), Bleed valve (needle type)
✔ Hour meter with 6 digits
✔ NPT or 37° Flare 1/4" - Male inlet / outlet ports

Technical Specifications:
✔ Dimensions (L x H X D): 940 x 292 x 559 mm
✔ Weight: 65.9 kg (145 lbs)
✔ Voltage: 120 or 240V AC single phase (other voltages available as well as 3 phases) motor
✔ Frequency: 60/50 Hz
✔ Noise: < 63dB
✔ Operational Speed: 70 cycles/min (variable speed option)
✔ Cooling: Air cooled
✔ Maximum Inlet and Outlet Pressure: 414 bar
✔ Minimum Input Pressure: 34 bar
✔ Maximum Flow Rate: 617 SLPM (dependent on input pressure)

Please note that the typical lead time is six to eight weeks. This compressor is not a ready in stock item and is produced when an order is placed.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: