- Fuel Cell Cars
- Fuel Cell Stacks
- Fuel Cell Testing
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
Johnson Matthey Fuel Cell's HiSPEC® catalysts consist of single and bimetallic, highly dispersed supported and unsupported catalysts used on anodes and cathodes in Polymer Electrolyte Fuel Cells (PEMFC) and Direct Methanol Fuel Cells (DMFC). HiSPEC catalysts are highly active and are designed and manufactured to the highest quality standards for maximum performance and durability.
HiSPEC Platinum 10% on Carbon - HiSPEC 2000 is most commonly recommended for use in the Polymer Electrolyte Fuel Cell (PEMFC), Direct Methanol Fuel Cell (DMFC), Microbial Fuel Cell (MFC), and Phosphoric Acid Fuel Cell (PAFC) applications (as the cathode catalyst or anode catalyst). It is also used as a recombination catalyst for hydrogen elimination or, as a building block for sensor elements.
The Fuel Cell Store is an authorized dealer for Alfa Aesar / Johnson Matthey products.
|Platinum, wt%(dry basis)||9.5 to 10.5|
|Ruthenium, wt% (dry basis)||N/A|
|Platinum Atomic % (from total metal)||N/A|
|Ruthenium Atomic % (from total metal)||N/A|
|Tap Density after screening (typical), g/cc||N/A|
|Lattice Parameter, nm||N/A|
|Loss on Reduction, wt%||N/A|
|Total Chloride, wt%||N/A|
|Metal Area, Pt||105 (g2/m) Min|
|XRD Crystallite Size||3 (nm) Max|
|Hydrolyzable Chloride||300 Max|
|Total Metallic Impurities, ppm (spectroscopic emission)||N/A|
|Impurities (ppm wt catalyst)||500 total max|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: