Categories
Quick Add To Cart

Solid Oxide Fuel Cell Components

Solid Oxide Fuel Cells (SOFC) are a type of fuel cell that use a solid oxide material as the electrolyte. SOFCs use a solid oxide electrolyte to conduct negative oxygen ions from the cathode to the anode. The electrochemical oxidation of the oxygen ions with hydrogen or carbon monoxide thus occurs on the anode side.

Solid Oxide Fuel Cells (SOFC) operate at very high temperatures (500 - 1,000°C). At these temperatures, SOFCs do not require costly platinum catalyst, as is currently necessary for lower-temperature fuel cells such as Proton Exchange Membrane Fuel Cells (PEMFC), and are not vulnerable to carbon monoxide catalyst poisoning. However, vulnerability to sulfur poisoning has been widely observed and the sulfur must be removed before entering the cell through the use of adsorbent beds or other means.

SOFCs have a wide variety of applications from use as auxiliary power units in vehicles to stationary power generation with outputs from 100W to 2MW. Higher operating temperatures make SOFCs suitable candidates for application with heat engine energy recovery devices or combined heat and power, which increases overall fuel efficiency.

Display: List / Grid
Show:
Sort By:
Gadolinium Doped Ceria (10% Gd) - Mid Grade Powder
Gadolinium Doped Ceria (10% Gd) Powder has a high surface area, between the TC grade and nanoscal..
From $789.00

Gadolinium Doped Ceria (20% Gd) - Mid Grade Powder
Gadolinium Doped Ceria (20% Gd) Powder has a high surface area, between the TC grade and nanoscal..
From $789.00

Samarium Doped Ceria (20% Sm) - Mid Grade Powder
Samarium Doped Ceria (20% Sm) Powder has a high surface area, between the TC grade and nanoscale ..
From $789.00

Yttria-Stabilized Zirconia (8% Y) - Tape Cast Grade Powder
Yttria fully Stabilized Zirconia (with 8 mol% Y2O3) is a commonly used and well characterized cer..
From $212.00

Yttria-Stabilized Zirconia (8% Y) - Spray Dried Grade Powder
Yttria fully Stabilized Zirconia (with 8 mol% Y2O3) is a commonly used and well characterized cer..
From $296.00

Yttria-Stabilized Zirconia (8% Y) - Fine Grade Powder
Yttria fully Stabilized Zirconia (with 8 mol% Y2O3) is a commonly used and well characterized cer..
From $212.00

Yttria-Stabilized Zirconia (8% Y) - Mid Grade Powder
Yttria fully Stabilized Zirconia (with 8 mol% Y2O3) is a commonly used and well characterized cer..
From $212.00

Yttria-Stabilized Zirconia (8% Y) - Standard Grade Powder
Yttria fully Stabilized Zirconia (with 8 mol% Y2O3) is a commonly used and well characterized cer..
From $212.00

Scandia Ceria Stabilized Zirconia (10% Sc, 1% Ce) Powder
Scandia fully Stabilized Zirconia (with 10 mol% Sc2O3) Powder has the highest oxygen ionic conduct..
From $1,052.00

Scandia Stabilized Zirconia (10% Sc) Powder
Scandia fully Stabilized Zirconia (with 10 mol% Sc2O3) Powder has the highest oxygen ionic conduct..
From $1,052.00

Scandia Alumina Stabilized Zirconia (6% Sc, 1% Al) Powder
Scandia partially Stabilized Zirconia (with 6 mol% Sc2O3) Powder provides a good combination of me..
From $1,052.00

Nickel Oxide - YSZ Anode Powder for General Applications
Nickel Oxide - YSZ Anode Powder is suitable for tape casting, ink manufacture, pellet pressing an..
From $250.00

Nickel Oxide - YSZ Anode Powder for Coating Applications
The Nickel Oxide - YSZ Anode Powder for Coating Applications material has simple composition opti..
From $250.00

Nickel Oxide - GDC Anode Powder for Coating Applications
This composite powder of Nickel Oxide and 10 mole% Gadolinium Doped Ceria is a catalytically acti..
From $664.00

Nickel Oxide Standard Grade Anode Powder
Nickel Oxide Standard Grade Anode Powder is used as a constituent in anode materials for Solid Ox..
From $172.00