Edustak Junior 10 Cell

Brand: Horizon Fuel Cell Technologies
Product Code: 810003

Price:
$1,249.00

Qty: - +
   - OR -   

Recommended Accessories:


Horizon's Renewable Energy Monitor Horizon's Renewable Energy Monitor $164.99 Qty: Add to Cart

EDUSTAK Junior provides fuel cell technology for the classroom without using compressed hydrogen.  Investigate the power potential of hydrogen technology by constructing your own 4 watt fuel cell stack.  HYDROSTIK PRO metal hydride cartridges provide instant hydrogen fuel and no tools are required to assemble a stack.  EDUSTAK is the perfect technology to conduct advanced research on Membrane Electrode Assemblies (MEA), investigate thermal effects within stacks and is even a shortcut to starting your own fuel cell lab.

Features:

✔ Easy-assembly – no tooling required
✔ The stack power is readily scalable and it’s straightforward to integrate sensors
✔ Rated output power up to 4W
✔ Optimal thermal management with air cooing circulation in each plate
✔ Includes HYDROSTIK PRO with tubing and adapted pressure regulator
✔ Comes with a complete instruction guide
✔ UPC: 6942503405170

 Horizon EDUSTAK Junior 10 Cell User Manual, FCSU-32

Contents Include:

✔ EDUSTAK JUNIOR
HYDROSTIK PRO
✔ Manometer
✔ Electronic PCB card
✔ Blower fan
✔ Air pump
✔ HYDROSTIK PRO base
✔ Purging valve with tube

✔ Screws
✔ Three port connector
3 Silicon tubes
✔ Clamp with tube
Pressure Regulator
✔ HYDROSTIK PRO support
Wires

 

 Edustak Junior
 
• Air pump
 Electronic Printed Circuit Board (PCB) Card
 
• Three port connector
• Manometer
 Small Fan / Wheel Motor Module
 
• Fan Blade
 HYDROSTIK PRO is a convenient hydrogen storage solution to fuel your hydrogen powered devices. Rather than compressing hydrogen gas, the safe, and reliable HYDROSTIK binds hydrogen with a metal alloy to form a solid metal hydride.
 
• HydroSTIK PRO Base
 Horizon's H-Series Pressure Regulator fits HydroSTIK and HydroSTIK PRO canisters and reduces the Hydrogen outlet pressure down to 0.45 - 0.55 bar suitable for use in most Fuel Cells. Output connector fits 3mm ID x 5mm OD tubing.
 Kit Accessories
 
Clamps
• Purging valve with tube
• Screws
Fuel Cell Properties
Number of Cells 10.0
Rated Power 4W
Rated Performance 6V at 0.7A
External Temperature 5 to 35ºC
Reactants Hydrogen and air
Max Stack Temperature 55ºC
Hydrogen Pressure 0.45 to 0.55bar
Humidification Self-humidified
Cooling air (integ. cooling fan)
Stack Weight (with Fan & Casing) 510 g
Hydrogen Flow Rate at Max Output 0.05 L/min
Stack Size 125 X 60 X 95mm
Hydrogen Purity Requirement ≧99.995% dry Hydrogen
Start up time ≦30s at room temp.
Efficiency of System 40% at full power
Type of Fuel Cell Polymer Electrolyte Membrane (PEM)
Low voltage shut down 5V
Over current shut down 1A
Over temp. shut down 50ºC

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: