Edustak Pro 10 Cell

Brand: Horizon Fuel Cell Technologies
Product Code: 810004

Price:
$1,899.99

Qty: - +
   - OR -   

Recommended Accessories:


Horizon's Renewable Energy Monitor Horizon's Renewable Energy Monitor $164.99 Qty: Add to Cart

EDUSTAK PRO demonstrates the fuel stack technology that is powering cutting-edge transport solutions and generators.  Assemble your own fuel cell stack of individually connected cells and then power up with the refillable HYDROSTIK PRO metal hydride cartridges.  EDUSTAK comes in 5-cell and 10-cell stacks depending on your hydrogen power requirements.  No tools necessary to assemble the cell stacks so you can concentrate on creating your very own hydrogen powered applications.  This ease of use makes it simple to scale the stacks to different power levels and integrate equipment such as sensors.  Whether it’s advanced research on MEAs, creating your own fuel cell lab or conducting professional training EDUSTAK PRO has a load of practical applications.

Features:

✔ Easy-assembly – no tooling required
✔ The stack power is readily scalable and it’s straightforward to integrate sensors
✔ Rated output power up to 20W
✔ Optimal thermal management with air cooling circulation in each plate
✔ Includes HYDROSTIK PRO with tubing and adapted pressure regulator
✔ Comes with a complete instruction guide
✔ UPC: 6942503405187

 Horizon EDUSTAK Pro 10 Cell User Manual, FCSU-33

Contents Include:

✔ EDUSTAK PRO
HYDROSTIK PRO and base
✔ Manometer
✔ EDUSTAK PRO blower
Wires
✔ Air pressure bulb
✔ Purging valve with tube

✔ Screws
✔ Three port connector
3 Silicon tubes
✔ Clamp with tube
Pressure Regulator
✔ HYDROSTIK PRO support

 Edustak Pro
 
• Air pump
• Blower
• Air pressure bulb
• Three port connector
 HYDROSTIK PRO is a convenient hydrogen storage solution to fuel your hydrogen powered devices. Rather than compressing hydrogen gas, the safe, and reliable HYDROSTIK binds hydrogen with a metal alloy to form a solid metal hydride.
 
• HydroSTIK PRO Base
 Horizon's H-Series Pressure Regulator fits HydroSTIK and HydroSTIK PRO canisters and reduces the Hydrogen outlet pressure down to 0.45 - 0.55 bar suitable for use in most Fuel Cells. Output connector fits 3mm ID x 5mm OD tubing.
 Kit Accessories
 
Clamps
• Purging valve with tube
• Manometer
• Screws
Fuel Cell Properties
Number of Cells 10.0
Rated Power 20W
Rated Performance 6V at 3.4A
External Temperature 5 to 40ºC
Reactants Hydrogen and air
Max Stack Temperature 60ºC
Hydrogen Pressure 0.45 to 0.55bar
Humidification Self-humidified
Cooling air (integ. cooling fan)
Stack Weight (with Fan & Casing) 1000 g
Hydrogen Flow Rate at Max Output 0.25 L/min
Stack Size 105 X 90 X 130mm
Hydrogen Purity Requirement ≧99.995% dry Hydrogen
Start up time ≦30s at room temp.
Efficiency of System 40% at full power
Type of Fuel Cell Polymer Electrolyte Membrane (PEM)
Low voltage shut down 5V
Over current shut down 10A
Over temp. shut down 60ºC

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: