Ultralight PEM Fuel Cell - 200W

Brand: Horizon Fuel Cell Technologies
Product Code: 3271501

Qty: - +
   - OR -   
AEROSTAKS are special Horizon designed fuel cells that are up to 10 times lighter and smaller than other fuel cells.  AEROSTAK fuel cells are typically used in specialty applications where weight is a critical factor.  They are available in three standard ratings and specifications, but can be modified at additional costs according to other nominal and peak power, or voltage requirements.
 
How did Horizon make the AEROSTAKS lighter?
 
Horizon developed proprietary cellular level water management technologies eliminating cumbersome and typically heavy external water management systems which are needed in conventional PEM fuel cell systems.  This, combined with the use of high performance and lightweight materials, makes the AEROSTAK special assemblies the most power dense PEM fuel cell stacks in the world, reaching power densities of over 1W per gram.
 
 
Based on ambient temperature and altitude below 3000 meters. Increased altitude changes the power curve due to the reduced oxygen partial pressure.
Hydrogen consumption is proportional to the output net current. At rated power, the maximum hydrogen consumption is less than 7 slp
 

Includes:

✔ Control Electronics
✔ Hybrid battery card (charging)         
✔ Integrated blower and casing
✔ Low pressure protection
 
 
 
Typical lead time of 4 to 6 weeks expected.

                        

                    Starter / peak power battery included

 

Fuel Cell Properties
Number of Cells 35
Rated Power 200W (220W Peak)
Hydrogen Supply Valve Voltage N/A
Purging Valve Voltage 5V
Blower Voltage 12V
Reactants Hydrogen and Air
Ambient Temperature 5 - 30°C (41 - 86°F)
Max Stack Temperature 65°C (131°F)
Hydrogen Pressure 0.5 - 0.6 Bar (7.3 - 8.7 PSI)
Humidification Self-humidified
Cooling Air (integrated cooling fan)
Controller Weight 80g (0.18 lb)
Stack Weight (with Fan & Casing) 500g (1.1 lb)
Hydrogen Flow Rate at Max Output 2.8 L/min
Stack Size 126 X 116 X 138 mm (5.0 x 4.6 x 5.4 inch)
Hydrogen Purity Requirement 99.999% (dry H2)
Start up time ≤ 30s (ambient temperature)
Low Voltage Protection 17.5V
Over Temperature Protection 65°C (131°F)

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: