Electronic Load ECL-450

Product Code: 72108119

Price:
$7,850.00

Qty: - +
   - OR -   
ECL-450 Electronic Load - Conforms to the directives of the European Community for safety in laboratory equipment.  Two operating Ranges - 20A, 20V (400W) & 100A, 3V (300W) - Balanced MOSFET Circuit Design -  Two Operating Modes - Current Control, Voltage Control; Accurate and Repeatable.
 
 
Key Features:
 
✔ Current controlled / Voltage controlled
✔ Two control methods:
• Manual – front panel Potentiometer setting visual front panel digital readout
• Remote – rear panel input signal (0 – 10V) rear panel output Voltages for Current an Voltage (0 – 10V)
✔ Two operating ranges:
• 20A, 20V capacity (400W)
• 100A, 3V capacity (300W)
✔ Two operating modes:
• Current control
• Voltage control
✔ Balanced MOSFET circuit design
✔ Excellent low Voltage operation
✔ Accurate and repeatable

 

 

Manual Controls
  • Load enable switch
  • Current control / Voltage control switch
  • (20V / 20A) / (3V / 100A) range switch
  • 10 turn Potentiometer manual set point
Digital Current and Voltage Display
  • 4.5 digit display
  • Current: 10 mA resolution, 50 mA accuracy
  • Voltage: 1 mV resolution, 1 mV accuracy
Rear Panel Input
  • Current 0 – 10V for selected 0 – full scale range
  • Voltage 0 – 10V for selected 0 – full scale range
  • Input impedance 100 k Ohms
Rear Panel Output
  • Current 0 – 10V for selected 0 – full scale range
  • Voltage 0 – 10V for selected 0 – full scale range
  • Output impedance 100 Ohms
Electrical Accessories
  • 2 high flexibility, high current leads
  • 2 banana jack cell voltage probes
  • Rear panel screw terminal for input / output
  • Frequency response to 10 kHz
Electrical Requirements
  • 110VAC 5A (or 220VAC 2.5A)
Physical Characteristics
  • Size (W x H x D): 19 x 5.25 x 13 inches (48 x 14 x 33 cm)
  • Weight: 10 lbs. (4.5 kg)

 

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: