PEM Fuel Cell Hardware

Product Code: 72108004-1

Price:
From $3,579.00

Available Options


* Active Area Size:

Qty: - +
   - OR -   

Recommended Accessories:


Hydrogen Air MEA - 5 Layer Hydrogen Air MEA - 5 Layer $60.00 Qty: Add to Cart

Fuel Cell Hardware is an electrochemical device that converts chemical fuel, such as hydrogen, natural gas, methanol, etc. into energy and water.  This item includes all the key components to make such reactions occur.  It also performs compression of the membrane electrode assembly (MEA) while providing uniform gas distribution and uniform temperature to the cell.

A gold-plated plate serves as current collector plate for the fuel cell.  The gold plating provides corrosion protection and good electrical contact with the graphite separator plate.  A high purity graphite plate with high electrical conductivity (900 Scm-1) and high thermal conductivity (117 Wm-1K-1) is designed with gas flow channels and manifold.  A Gasket is included to provide a secured seal for the MEA.  High power silicon rubber heaters are installed at both ends of the fuel cell to maintain a constant cell temperature.

Features:
 
✔ Machined graphite separator plates
✔ Gold plated current collectors
✔ Banana plugs for monitoring voltage
✔ Belleville washer
✔ Built-in silicon rubber heaters (120 watt) for maintaining cell temperature
✔ Nylon fitting/SS nut for gas tight connection to 1/4” tubing
 

 

Schematic of the Fuel Cell Hardware's Components:

 

Fuel Cell Hardware is also available with other Flow Field Designs Upon Quotation

  • Column / Pin Type
  • Serpentine
  • Straight Channel

 

 
What is a Reference Electrode?

A reference electrode provides more accurate measurement of voltage without the effect of current.  The reference electrode is used to measure and monitor the electrochemical polarization behavior of individual anode and cathode electrode independently.  A metallic Pt wire is installed as a reference at the fuel cell hardware.

The Pt wire reference electrode is generally located in an open compartment independent of the flow field.  However, Hydrogen Reference Electrode's Pt wire is located in an open compartment which is connected to the flow field of the fuel cell.

 
General lead time of two weeks to be expected.

 

1. Through-Bolt Assembly Design
• Low Tightening Force Required
• Create Uniformed Force Distribution: 5in/lb
 
2. Implement Pinch Adjustment Mechanism
• Capable of Applying Torque Equally to the Bolts
• Contain Flat Gaskets with High Precision Thickness
 
3. Fuel Cell Grade Graphite Plate
• Gas Non Permeable / Excellent Chemical Resistance
• High Electrical/Thermal Conductivity and Mechanical Strength
 
4. Adaptable to Varied Flow Field Plate Design
• Current Collector Plate
• Gold Plated Plate – for corrosion resistance
 
5. Thermocouple Insert Hole
• Reach Thermocouple at Center of Fuel Cell Test Hardware
• Precisely Control and Monitor the Temperature
• Closest to the MEA
 
6. Voltage Measurement Banana Plug
• For Exact Measurement of Cell Voltage (using the highly electrically conductive graphite plate)
• Eliminate Voltage Drop due to Contact Resistance
 
7. Silicone Rubber Heater
• Provide Highest Watt Density
• Maintain Uniform Cell Temperature (using the highly thermally conductive graphite plate)
Active Area Features Technical Specifications
1, 5, and 25 cm²
Gold plated current collectors
 
Machined graphite separator plates
 
Banana plugs for monitoring voltage
 
Belleville washer
 
Built-in silicon rubber heaters (120 watt) for maintaining cell temperature
 
Nylon fitting/SS nut for gas tight connection to 1/4” tubing
Gaskets:  Silicone (standard)
 
Size At (H x W x L): 11cm x 9.5cm x 4.5cm 
 
Weight (pounds): 3
 
Fuel Compatibility:  O2, H2, air, methanol, ethanol, liquid acid/base electrolyte
 
Normal Operating Temp: 65 to 75 °C
 
Maximum Temp: 180 °C
 
50 and 100 cm²   
Aluminum end plates
 
Gold plated current collectors
 
Machined graphite separator plates
 
Banana plugs for monitoring voltage
 
Belleville washer
 
Air-cooled stack
 
SS fittings for gas tight connection to 1/4” tubing
 
FC-50 Hardware can be used with Bi-Polar plates to create a Fuel Cell Stack
 
Gaskets:  Silicone (standard)
 
Size at 50cm² (H x W x L): 13.5 cm x 13.5 cm x 5 cm
 
Weight at 50cm²:  5.5 lb
 
Fuel Compatibility:  O2, H2, air, methanol, ethanol, liquid acid/base electrolyte
 
Normal Operating Temp: 65 to 75 °C
 
Maximum Temp: 180 °C

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: