Your shopping cart is empty!
+1 (855) 251-0016 | email@example.com
- Fuel Cell Cars
- Fuel Cell Stacks
- Fuel Cell Testing
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
The Hydrogen G600 bench-top stackable generator utilizes Proton Exchange Membrane (PEM) cell stack and desiccant dryer to produce UHP hydrogen for laboratory applications at 600 cc/min. The G600 Hydrogen Generator system is capable of sensing demand and adjusting production rate, while maintaining quiet operation.
This ultra-high purity, low mainteneance hydrogen generator is frequently used to supply hydrogen for GC and GC/MS or all commonly used combustion detectors used routinely with GCs. This Hydrogen Generator generates hydrogen on-demand at low pressures (up to 116 psi) as a safe and economical replacement for compressed gas storage.
Safe Operation: The purge airflow monitoring system and an automatic leak detection system assure the environment below LFL.
Efficiency: Water monitoring system (with purity monitor), system senses, auto-fill water level control and automatic production control guarantee the system running at optimal level.
Convenience: It is equipped with removable water feed tank, maintenance diary, report alarms and a touch screen display.
✔ Auto fill water level control
✔ Compact size and quiet operation
✔ Water monitoring system including purity monitor
✔ Automatic production control
✔ Purge airflow monitoring system assures safe operation
✔ Including maintenance diary, report alarms, built-in touchscreen display
✔ Removable water tank
✔ Automatic leak detection system
✔ Additional Desiccant Cartridge
✔ Maintenance Diary
✔ Removable Water Feed Tank
✔ Report Alarms
✔ Touch Screen Display
|Hydrogen Generator Properties|
|Flow Rate||600 cc/min|
|Output Pressure||3 to 8 barg (43 to 116 psig)|
|Purity||99.9995% (H2O < 5 ppmv, O2 < 1ppmv)|
|DI Water Supply||Deionized, ASTM Type II, > 1 Meg Ohm-cm (<1 microSiemen/cm) < 0.5 ppm, Total Dissolved Solids|
|DI Water Feed Pressure Spec for Auto-Fill||> 0.7 barg (10 psig)|
|Water Consumption Rate||36 cc/hr, 0.86 L/day|
|Power Consumption Rate||< 250 W|
|Electrical Supply||120 - 230 VAC, Auto Ranging, 50/60 Hz|
|Ingress Protection Rating||IP20|
|Operating Temperature||40°F to 104°F (5°C to 40°C)|
|Dimensions||14.5” (H) x 20.5” (D) x 9” (W)|
|Max Altitude||2000 m/ 6560 ft above sea level|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Related Products (6)