- Fuel Cell Cars
- Fuel Cell Stacks
- Fuel Cell Testing
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
The S Series hydrogen generation systems produce up to 1.05 Nm3/hr (40 scf/hr) of ultra-high purity hydrogen gas for applications such as materials processing, power plant generator cooling and electronics applications.
With a production rate of 20 or 40 scf/hour, the compact S Series hydrogen generator produces the equivalent of four cylinders of better-than-UHP grade hydrogen every day. Proton Onsite hydrogen generation systems are helping many industries eliminate costs associated with delivery and use of hydrogen.
Hundreds of these hydrogen generator systems have been delivered to customers in electric power generator cooling, materials processing, electronics/ semiconductor fabrication, scientific hydrogen applications, for meteorological balloon filling, and for H2 fueling systems and fuel cell development.
* All of the units in the S Series can be provided in a high pressure version if desired.
|Hydrogen Generator Properties|
|Net Production Rate||1.05 NM3/hr; 40 SCF/hr; 18.8 SLPM; 2.27 kg/24hr|
|Delivery Pressure - Nominal||13.8 barg (200 PSIG)|
|Power Consumed per Volume of H2 Gas Produced||6.7 kWh / NM3 17.6 kWh/ 100 ft3|
|Purity||99.9995% (Water Vapor < 5 ppm, -65°C (-85°F) Dewpoint, N2 <2 ppm, O2 < 1PPM, All other undetectable)|
|DI Water Supply||ASTM Type II Deionized Water required, < 1 micor Siemen/cm (>1 megOhm-cm) ; ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (>10 megOhm-cm)|
|Required Water Pressure||1.5 to 4 barg (21.8 to 58.0 PSIG)|
|Water Consumption Rate||0.94 L/hr (0.25 gal/hr)|
|Electrical Supply||205 to 240 VAC, single phase 50 or 60 Hz|
|Cooling||Air-cooled; Ambient Air, 5°C to 40°C (41°F to 104°F)|
|Max. Heat Load from System||4.3 kW / 14,763 BTU/hr|
|Max Altitude||1520 m (5000 ft)|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: