NTM SenseH2 - R Hydrogen Sensor

Product Code: 6211764


3 or more 10 or more 100 or more
$522.00 $471.00 $428.00
Qty: - +
   - OR -   

Recommended Accessories:

NTM SenseH2 Calibration Kit NTM SenseH2 Calibration Kit $460.00 Qty: Add to Cart
NTM Connect H2 NTM Connect H2 $73.90 Qty: Add to Cart

The NTM SenseH2-R is a version of the NTM SenseH2 Hydrogen Sensor that is designed specifically for monitoring hydrogen in environments where refrigerant gases are present.  This ceramic sensor delivers a highly sensitive and rapid response to the presence of hydrogen in ambient air, creating a new level of safety and protection in your work environment.  The compact and rugged design allows it to easily be incorporated into various systems, such as fuel cell powered vehicles, or function as a stand-alone room monitoring device.

Product Features:

• Tolerant to halogen background gases used in refrigerant and fire suppression systems
• High sensitivity and selectivity to hydrogen
• Rapid response & recovery times
• Immune to signal saturation
• Robust to widely varying ambient flow rates
• Compact and rugged design
• Output spans 0.25 to 4.0% H2 in air (5 to 100% LFL)
• Accuracy of +/- 0.25% hydrogen
• Insensitive to CO and CH4
• Insensitive to humidity, temperature, and flow rate variation
• Works in a variety of environments
• Requires a warm-up period prior to hydrogen detection
• Durable and stable for long term operation
• Lowers cost of ownership

The NTM SenseH2 Hydrogen Sensor is intended for use as a hydrogen gas detector in the range of 0.25 to 4% hydrogen in air.

Typical Applications:

• Stationary fuel cells
• Fuel cell powered forklift trucks
• Hydrogen refueling stations
• Hydrogen generation (electrolyzer) systems
• On‐site fuel reforming systems
• Uninterruptible power supply (UPS) systems monitoring
• Telecom systems monitoring
• Laboratory monitoring


Sensor: The sensor element employs a patented, chemi‐resistive ceramic technology, which provides accurate and reliable hydrogen detection.  The sensor element is securely attached to a TO8 header for seamless integration with the electronics package.



​Electronics Package: The sensor provides a simple interface with a ratio‐metric voltage output (1 to 4.5 VDC; 500mV increments), calibrated to detect up to 4% H2 in air (100% of the LFL). Diagnostic states (< 1V, >4.5V) are provided to indicate error conditions. Microprocessor‐based heater control ensures stable operation in temperatures ranging from –20 to 80°C. The compact, rugged design and waterproof connector enable use of the NTM SenseH2® hydrogen sensor in a range of application conditions.


NTM SenseH2 - R Hydrogen Sensor Technical Specifications

SenseH2 - R Datasheet

Hydrogen Sensor Flow Sensitivity

Tips for Installing Your Hydrogen Sensor


Typical Calibration:

Sensor Dimensions:

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: