Silicon Gasketing - 12" x 11 7/8" x 0.15" (Clearance)

Product Code: CL-060917


Qty: - +
   - OR -   

Thin gauge 12 x 11 7/8 x 0.15 inch Silicon Rubber Gasketing for use in fuel cell fixtures.  Like other silicon, this rubber stays flexible over a wide temperature range, but its softness gives it better conformability than other rubber.  A peel-off protective masking keeps this rubber free from dust and debris. Width and length tolerances are ±1/4".  Durometer tolerance is ±5.

Teflon and fiberglass reinforced Teflon are used in high temperature applications such as High Temperature Polymer Electrolyte Membrane Fuel Cells (HT-PEMFC) and Phosphoric Acid Fuel Cells (PAFC).

HT6135 Silicon gasketing is a solid silicone elastomer.  Silicone elastomers exhibit a natural shrinkage when the carrier or liner is removed.  Thickness measurements do not include carrier or liner.

This Silicon Gasketing has been placed on Clearance due to the odd sizing of 12" x 11 7/8" versus our typical 12" x 12".  There is nothing wrong with this Silicon Gasketing.


Gasket Properties
Durometer 35A (soft) ±5
Thickness Tolerance ± 1/4 inch
Tensile Strength (psi) 800
Temperature Range -80°F to +425°F

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: