- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Pressure Monitoring
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
Chemours' (formerly DuPont) Nafion® N-324 is a perfluorosulfonic acid cation exchange membrane combining outstanding chemical resistance with a strong polytetrafluoroethylene fiber reinforcement. It is recommended for use in chloroalkali production and a variety of electrolytic processes. Nafion-324 is 0.28mm (0.011in) thick.
Laboratory Cell (45cm² active area)*
|Cell Voltage (V)||Current Efficiency (%)||NaOH (%)|
*Conditions: 3mm gap, DSA anode, steel cathode, 90°C
Nafion N-324 is shipped in the "DRY" H+ form. "DRY" H+ membranes require simple pre-treatment in alkaline water. Refer to Nafion Technical Bulletin No. 93-01 for "DRY" H+ membrane pretreatment.
Please Note: The side marked CATH must be installed facing the cathode, otherwise, the membranes will be irreversibly damaged in use. If your membrane is not marked simply feel both sides of the membrane, the rougher side will be the cathode side while the smoother side is the anode side.
DuPont / Chemours does not currently provide much information about Nafion N324 besides the information we have listed on this page. The typical thickness of Nafion N324 is 0.011 inches.
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: