- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
Please note that NE1035 has been discontinued by Chemours and only limited supplies are available for the time being.
Nafion™ Membrane NE1035 is used to separate the anode and cathode compartment of Proton Exchange Membrane fuel cells, batteries and water electrolyzers. Nafiion 1035 has a low Equivalent Weight (1000EW) and a higher conductivity, making it particularly suitable for energy storage applications, such as batteries, Direct Methanol Fuel Cells (DMFC) and Electrolysis applications. Nafion™ NE1035 is a 89 micrometer (3.5 mil) thick cation exchange membrane.
Chemours Nafion™ NE1035, EW1000 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release compared to the non-stabilized polymer – a sign of improved chemical durability. Nafion™ PFSA membranes are widely used for Proton Exchange Membrane (PEM) fuel cells and water electrolyzers. The membrane performs as a separator and solid electrolyte in a variety of electrochemical cells that require the membrane to selectively transport cations across the cell junction. The polymer is chemically resistant and durable.
Please contact us at firstname.lastname@example.org for the SDS and technical data sheets (TDS).
|Thickness||89 micrometer (3.5 mil)|
|Tensile Strength - max. (MPa)||38 Mpa at 10% RH, 23°C and 19 Mpa at 369 Mpa at water soaked, 23°C|
|Non-Std Modulus (MPa)||369 Mpa at 10% RH, 23°C and 90 Mpa at 369 Mpa at water soaked, 23°C|
|Elongation to Break (%)||148% at 10% RH, 23°C and 133% Mpa at 369 Mpa at water soaked, 23°C|
|Specific Gravity (23 °C, 50% RH)||2|
|Available Acid Capacity (meq/g)||1.0 min|
|Total Acid Capacity (meq/g)||1.03 to 1.12|
|Membrane Hydrolytic Properties|
|Water content (% water)||~5%|
|Water uptake (% water)||43%|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: