Disassemble and reassemble your own fuel cell stack of individually connected cells with the Adapta-Stack Hydrogen Air PEM Fuel Cell.  The Adapta-Stack is available in 1-cell, 5-cell, 10-cell, 15-cell, and 20-cell stack configurations, depending on your hydrogen power requirements.  The ease of use makes it simple to scale to different power levels and integrate equipment such as sensors.  The Adapta-Stack fuel cell is an excellent learning tool that gives hands-on experience with promising fuel cell technology.  Whether it’s advanced research on MEAs, creating your own fuel cell lab, or conducting professional training, the Adapta-Stack has numerous practical applications.

The Adapta-Stack is a fully assembled, tested, and ready-to-use PEM Fuel Cell.  Only a screwdriver (1/4 inch) and a torque wrench (<50 in-lb) are necessary to disassemble, so you can concentrate on creating your very own hydrogen-powered applications. Digital torque screwdriver or digital torque wrench sets (with 0 to 100 in-lbs capability) can also be used to assemble the Adapta-Stack hardware.

The Adapta-Stack allows the principle of proton exchange membrane (PEM) fuel cells to be

demonstrated and measurements taken. The system has been developed for teaching and

demonstration purposes only. Any other use is prohibited!

Hydrogen and atmospheric oxygen are required for operation of the Fuel Cell Stacks.

The Adapta-Stack is a dismantable open-air cathode fuel cell that allows for users to input their own custom PEM MEAs for testing!

✔ Acrylic Endplates
✔ Graphite Plates
✔ High Performance PEM MEAs
✔ Teflon Gaskets
✔ Copper Current Collectors
✔ Hardware
✔ 1/8" Alignment Pins
 

• MEA Active Area: 3.2 x 3.2cm (10cm²)
• MEA Membrane Area: 5 x 5cm
• Graphite Plate Overall Dimensions (L x W x D): 6.0 x 6.0 x 0.3 cm
• Recommended Torque Value: 8-10 in-lbs

• Stack Contents: CPVC Endplates, Copper Current Collectors, Graphite Plates, N212 Membrane, 0.5mg/cm² PtC 39 BB GDE, 0.010" PTFE Gasket, 1/8" Push-to-Connect Fittings, tubing

• Included Accessories: Guide Dowels

Adapta-Stack Flow Battery Specifications:

• Stack Weight (g):

• Stack LxWxH with fittings (mm): 75 x 87 x 87

• Stack Weight w/o fittings (mm): 43 x 87 x 87

• Stack Contents: CPVC Endplates, Copper Current Collectors, Graphite Plates, N212 Membrane, AvCarb 1071 GDL, 0.010" PTFE Gasket, 1/4" Polypropylene Fittings