Categories

Alkaline Water Electrolyzer Stack - 20 Cell

Product Code: 72800021

Qty: - +
   - OR -   

The development of high-efficiency nickel electrodes based on the core technology reduces the system production cost and generates hydrogen through the high-yielding rate per input power, and this technology has a long life cycle activating over 10,000 hours (for nickel based electrodes).  The estimated lifetime for the alkaline electrolyzer stack (or individual cells present in the stack hardware) is 6000 operational hours.  This alkaline electrolyzer stack requires a caustic solution of 30 wt% KOH for its efficient operation.

Hydrogen generated from the water electrolyzer is used as the energy storage medium for HESS (Hydrogen Energy Storage System). The water electrolyzer can be even powered by renewable energy such as solar, wind-power, tidal, night-time electricity, and surplus power energy. When needed, hydrogen is converted to electricity by the fuel cell.

Technical Specifications:


• Size: 260 X 260 X 150 mm
• Material: FRP, Engineering plastic
• Number of Cells: 20
• Membrane: Proprietary porous polymer
• Electrode Material: Proprietary nickel based electrode
• Electrolyzer Current Range (at 36V and 80°C): 60 - 100A (depending on the operational temperature)
• Electrolyzer Power Range: 600W - 3.2kW
• Electrolyzer Current Density Range (at 1.8V/cell): 300 to 500 mA/cm2 (depending on the operational temperature).  The electrolyzer stack has the potential to achieve higher current densities.
• Electrolyte: Alkali Solution (KOH, 30wt%)
• Operating Temperature Range: 15 - 85°C

Electrolyzer Cell Representative IV Curve:

An exemplary performance for an individual alkaline electrolyzer cell is provided below:

An exemplary IV Curve

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: