• 25W Single Output DC-DC Converter

Our DC/DC converters are designed to regulate the output voltage from the fuel cell stack to the final load so that you can get steady, reliable operation from your fuel cell.  This 25W converter accepts input voltages from 9.2 - 18 VDC and delivers a regulated 12 VDC output at up to 2.1 A.

Applications
 
  • Electronic equipment
  • Hobby equipment
  • Low power lighting solutions
 
Features
 
  • 2:1 wide input range
  • Protections:Short circuit/Over load/Over voltage
  • 1500VDC I/O isolation
  • Built-in EMI filter, low ripple noise
  • 100% full load burn-in test
  • Fixed switching frequency at 83KHz
  • Low cost
  • High reliability
  • 1 year warranty

Electrical Input
DC Current 1.6 A/24V
Efficiency (Typ.) 72%
Voltage Range 9.2 to 18 VDC
Electrical Output
Current Range 0 to 2.1 A
DC Voltage 12 V
Line Regulation +/- 0.3%
Load Regulation +/- 0.3%
Rated Current 2.1 A
Rated Power 25.2 W
Ripple & Noise (max.) 120 mVp-p
Setup, Rise, Hold Time 2.5s, 50ms, at full load
Voltage ADJ. Range 11 to16 VDC
Voltage Tolerance +/- 1.0%
Converter General
Humidity 20% to 90% RH non-condensing
Operating Temperature -10°C to +60°C (Refer to output load derating curve)
Protections Over Load: 105% to 150% rated output power, Protection type: Fold back current limiting, recovers automatically after fault condition is removed. Over Voltage: 16.8% to 20V/10% load, Protection Type: Hiccup mode, recovers automatically after fault condition is removed.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

25W Single Output DC-DC Converter

  • $52.00


Related Products

Mini DC/DC Converter
DC/DC 3A Buck Converter
Boost Buck DC Converter
USB DC/DC 3A Step Down Converter