2 mg/cm² Platinum Black - Carbon Cloth Electrode (W1S1010)

Brand: Fuel Cells ETC
Product Code: 1620016

Qty: - +
   - OR -   

The most cost effective, higher catalyst loading Gas Diffusion Electrode.  At 2.0 mg/cm² of Platinum Black, this GDE has 4-times the loading of the standard loading and is used in Fuel Cells and electrochemical systems requiring higher performance levels than can be reached with the lower loadings of supported catalysts.  This electrode is perfect for Hydrogen/Air Fuel Cell applications where the extra cost of the higher loading GDE may not be justified. The Gas Diffusion Layer (GDL) used is a standard carbon cloth with MPL which is 365 microns thick. Other GDL materials are also available by custom request, as are custom sizes and loadings.

Includes a Nafion Post Coat for improved water management and adhesion to the membrane.

2 mg/cm² Platinum Black - Carbon Cloth Electrode (W1S1009) has been discontinued and was permanently replaced by 2 mg/cm² Platinum Black - Carbon Cloth Electrode (W1S1010).

There is a limited quantity of this product is available.  Please contact us before you place an online order for this product.

Catalyst Properties
Catalyst Type Platinum Black - Fuel Cell Grade
Loading 2.0 mg/cm²
Gas Diffusion Layer Properties
Material Type Woven Carbon Fiber Cloth
Thickness 0.365 +/- 0.015 mm (365 +/- 15 microns)
Basic Weight (g/m²) 175 +/- 5
Air Permeability (s) < 27
Electrical Resistivity (through plane) < 14 mΩcm²
Microporous Layer Yes, on catalyzed side

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: