Categories

2 mg/cm² Platinum Black - Carbon Cloth Electrode (W1S1011)

Product Code: 11060064

Price:
From $77.00

Available Options


* Size (cm):

Qty: - +
   - OR -   

The most cost effective, higher catalyst loading Gas Diffusion Electrode.  At 2.0 mg/cm² of Platinum Black, this GDE has 4-times the loading of the standard loading and is used in Fuel Cells and electrochemical systems requiring higher performance levels than can be reached with the lower loadings of supported catalysts.  This electrode is perfect for Hydrogen/Air Fuel Cell applications where the extra cost of the higher loading GDE may not be justified. The Gas Diffusion Layer (GDL) used is a standard carbon cloth with MPL which is 410 microns thick. Other GDL materials are also available by custom request, as are custom sizes and loadings.

Includes a Nafion Post Coat for improved water management and adhesion to the membrane.

This product can be considered as a good replacement for the GDEs that were using W1S1009 and W1S1010 as the substrate of the same catalyst loading.

We usually carry this product as a stock item and it has short lead times (<1 week).  Depending on the demand, the lead time may extend to 3-4 weeks.

Catalyst Properties
Catalyst Type Platinum Black - Fuel Cell Grade
Loading 2.0 mg/cm²
Gas Diffusion Layer Properties
Material Type Woven Carbon Fiber Cloth
Thickness 0.410 +/- 0.015 mm (410 +/- 15 microns)
Basic Weight (g/m²) 200 +/- 5
Air Permeability (s) < 55
Electrical Resistivity (through plane) < 13 mΩcm²
Microporous Layer Yes, on catalyzed side

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: