CT GF065 is a graphite felt and a great electrode for Vanadium Redox Flow Batteries. It has a total thickness of 6500 um (microns). CT is a great low-cost alternative to conventional graphite felt materials.
CT GF065 is available in 20 x 20 cm or 40 x 40 cm sheets at this time.
- Excellent chemical stability
- Good electrical conductivity
- Even thickness
- Long life cycle
- Vanadium redox flow batteries where the graphite felt is usually used as the electrode material
- Other redox flow batteries such as non-aqueous redox flow batteries where the graphite felt is usually used as the electrode material
- Vacuum burn-out furnace, powder metallurgy equipments, heat treatment furnaces operating above 2000 degrees where the graphite felt can be used as the thermal insulation
- Electrode materials in water purification equipments
| Gas Diffusion Layer Properties | |
| Material Type | Graphite Felt |
| Thickness | 6.5 mm (6500 microns) |
| Basic Weight (g/m²) | 590 |
| Tensile Strength | 0.12 MPa |
| Carbon Content (%) | 98.5 % |
| Ash Content | <0.09 % |
Related Products
AvCarb G100 Soft Graphite Battery Felt
Request Quote
AvCarb G200 Soft Graphite Battery Felt
Request Quote
AvCarb C100 Soft Carbon Battery Felt
Request Quote
AvCarb C200 Soft Carbon Battery Felt
Request Quote
Carbon Fiber Felt Variety Kit
$126.00
CT GF100 Graphite Felt
Request Quote
CT GF020 Graphite Felt
$68.00
CT GF030 Graphite Felt
$82.00
CT CF120 Carbon Felt
Request Quote
AvCarb G300A Soft Graphite Battery Felt
Request Quote
AvCarb G600A Soft Graphite Battery Felt
Request Quote
AvCarb G650A Soft Graphite Battery Felt
Request Quote
PAN Graphite Felt - 3.1 mm thick
Request Quote
Rayon Graphite Felt - 6.3 mm thick
Request Quote