Fumasep FAA-3-50 - 412cm²

Fumasep FAA-3-50 is a non-reinforced Anion Exchange Membrane (AEM) with very low resistance, high selectivity and high stability in pH acidic and basic environment. The polymer backbone for this AEM is based on a hydrocarbon polymer material. Fumasep FAA-3-50 membrane is the thin brown foil, delivered on a backing foil (colourless rigid PET foil). Pull off carefully the membrane (brown) from the backing foil. The membrane is delivered in dry form.

Fumatech membranes are highly sensitive to differences in humidity and moisture content. Therefore the membranes can vary +/- 0.5cm from the original cut sizes. Also due to this sensitivity the manufacturer expects wrinkles to form, however soaking the membranes in deionized water will return the membranes to the full size planar state according to the manufacturer.

 • Applications: Electrodialysis for demineralisation, desalination, capacitive deionization and others. This membrane can also be used for standard alkaline fuel cell and electrolyzer applications that utilize slightly alkaline solutions (1-2 Molar).
 • Anion Exchange Membrane (AEM)
 • Thickness: 45 - 55 micrometers (1.77 - 2.17 mil)

Fumasep FAA-3-50 Technical Specification Sheet

Quantity In Stock: 1

Total Amount In Various Pieces: 412 cm²

PLEASE NOTE: Some of these clearance pieces may have broken edges or corners, cracked sides, or uneven siding. Also, this item cannot be returned nor refunded.

Write a review