Fumasep FAA-3-PK-75 - 1,109cm²

Product Code: CL-2019-21


Qty: - +
   - OR -   
This product has a maximum quantity of 1

Fumasep FAA-3-PK-75 is a PK reinforced Anion Exchange Membrane (AEM) with low resistance, high selectivity, high mechanical stability, and high stability in alkaline and acidic environment. The polymer backbone for this AEM is based on a hydrocarbon polymer material. The membrane is the thin brown foil, delivered on a backing foil (colourless rigid PET foil). Pull off carefully the membrane (brown) from the backing foil. The membrane is delivered in dry form.

Fumatech membranes are highly sensitive to differences in humidity and moisture content. Therefore the membranes can vary +/- 0.5cm from the original cut sizes. Also due to this sensitivity the manufacturer expects wrinkles to form, however soaking the membranes in deionized water will return the membranes to the full size planar state according to the manufacturer.

Fumasep FAA-3-PK-75 Features:

 • Applications: Electrodialysis for demineralisation, desalination, acid recovery and others.  This membrane can also be used for standard alkaline fuel cell and electrolyzer applications that utilize slightly alkaline solution (1-2 Molar).
 • Anion Exchange Membrane (AEM)
 • Stability Rang (pH) at 25°C: 0 - 14
 • Thickness: 70 - 80 micrometers (2.76 - 3.15 mil)

Fumasep FAA-3-PK-75 Technical Specification Sheet

Quantity In Stock: 1

Total Amount In Various Pieces: 1,109 cm²

PLEASE NOTE: Some of these clearance pieces may have broken edges or corners, cracked sides, or uneven siding. Also, this item cannot be returned nor refunded.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: