- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
Fumasep FAS-50 is a non-reinforced Anion Exchange Membrane (AEM) with very low resistance, high selectivity and high stability in pH acidic and basic environment. The polymer backbone for this AEM is based on a hydrocarbon polymer material. The membrane is the thin brown foil, delivered on a backing foil (colourless rigid PET foil). Pull off carefully the membrane (brown) from the backing foil. The membrane is delivered in dry form.
Fumatech membranes are highly sensitive to differences in humidity and moisture content. Therefore the membranes can vary +/- 0.5cm from the original cut sizes. Also due to this sensitivity the manufacturer expects wrinkles to form, however soaking the membranes in deionized water will return the membranes to the full size planar state according to the manufacturer.
• Applications: Electrodialysis for demineralisation, desalination, capacitive deionization and others. This membrane can also be used for standard akaline fuel cell and electrolyzers that are utilizing slightly alkaline solutions (1-2 Molar).
• Anion Exchange Membrane
• Stability range (pH) at 25 ºC: 1 - 14
• Thickness: 45 - 55 micrometers (1.78 - 2.17 mil)
Quantity In Stock: 1
Total Amount In Various Pieces: 1,331 cm²
PLEASE NOTE: Some of these clearance pieces may have broken edges or corners, cracked sides, or uneven siding. Also, this item cannot be returned nor refunded.
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: