Categories

Edustak Junior 10 Cell

Brand: Horizon Fuel Cell Americas
Product Code: 810003

Qty: - +
   - OR -   

This product is no longer supported by the Fuel Cell Store. This web page is being kept up for customers who have previously purchased the item from us for informational purposes.

We offer a wide variety of equivalent products from another leader in the renewable energy education market, H-TEC Education. Please see a list below of similar products that are available:

PEMFC Kit
Fuel Cell Stack 5
Fuel Cell Stack 10

EDUSTAK Junior provides fuel cell technology for the classroom without using compressed hydrogen.  Investigate the power potential of hydrogen technology by constructing your own 4 watt fuel cell stack.  HYDROSTIK PRO metal hydride cartridges provide instant hydrogen fuel and no tools are required to assemble a stack.  EDUSTAK is the perfect technology to conduct advanced research on Membrane Electrode Assemblies (MEA), investigate thermal effects within stacks and is even a shortcut to starting your own fuel cell lab.

Features:

✔ Easy-assembly – no tooling required
✔ The stack power is readily scalable and it’s straightforward to integrate sensors
✔ Rated output power up to 4W
✔ Optimal thermal management with air cooing circulation in each plate
✔ Includes HYDROSTIK PRO with tubing and adapted pressure regulator
✔ Comes with a complete instruction guide
✔ UPC: 6942503405170

 Horizon EDUSTAK Junior 10 Cell User Manual, FCSU-32

Contents Include:

✔ EDUSTAK JUNIOR
HYDROSTIK PRO
✔ Manometer
✔ Electronic PCB card
✔ Blower fan
✔ Air pump
✔ HYDROSTIK PRO base
✔ Purging valve with tube

✔ Screws
✔ Three port connector
3 Silicon tubes
✔ Clamp with tube
Pressure Regulator
✔ HYDROSTIK PRO support
Wires

 Edustak Junior
 
• Air pump
 Electronic Printed Circuit Board (PCB) Card
 
• Three port connector
• Manometer
 Small Fan / Wheel Motor Module
 
• Fan Blade
 HYDROSTIK PRO is a convenient hydrogen storage solution to fuel your hydrogen powered devices. Rather than compressing hydrogen gas, the safe, and reliable HYDROSTIK binds hydrogen with a metal alloy to form a solid metal hydride.
 
• HydroSTIK PRO Base
 Horizon's H-Series Pressure Regulator fits HydroSTIK and HydroSTIK PRO canisters and reduces the Hydrogen outlet pressure down to 0.45 - 0.55 bar suitable for use in most Fuel Cells. Output connector fits 3mm ID x 5mm OD tubing.
 Kit Accessories
 
Clamps
• Purging valve with tube
• Screws
Fuel Cell Properties
Number of Cells 10.0
Rated Power 4W
Rated Performance 6V at 0.7A
External Temperature 5 to 35ºC
Reactants Hydrogen and air
Max Stack Temperature 55ºC
Hydrogen Pressure 0.45 to 0.55bar
Humidification Self-humidified
Cooling air (integ. cooling fan)
Stack Weight (with Fan & Casing) 510 g
Hydrogen Flow Rate at Max Output 0.05 L/min
Stack Size 125 X 60 X 95mm
Hydrogen Purity Requirement ≧99.995% dry Hydrogen
Start up time ≦30s at room temp.
Efficiency of System 40% at full power
Type of Fuel Cell Polymer Electrolyte Membrane (PEM)
Low voltage shut down 5V
Over current shut down 1A
Over temp. shut down 50ºC

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: