Gas Diffusion Layers
Gas Diffusion Layers (GDL) are key components in various types of fuel cells, including Proton Exchange Membrane (PEM), Direct Methanol (DMFC) and Phosphoric Acid (PAFC) stacks as well as in other electrochemical devices such as electrolyzers. In fuel cells, this thin, porous sheet must provide high electrical and thermal conductivity and chemical / corrosion resistance, in addition to controlling the proper flow of reactant gases (hydrogen and air) and managing the water transport out of the membrane electrode assembly (MEA). This layer must also have controlled compressibility to support the external forces from the assembly, and not deform into the bi-component plate channels to restrict flow. Other uses require different criteria, for example, electrolyzers require thicker, higher density porous plates, while humidifiers have most of the same requirements as fuel cell stacks, but the GDLs do not need to be electrically conductive. The GDL serves as a connection bridge between the MEA and graphite plate.
• A gas diffused pathway from flow channels to the catalyst layer
• Help removes by-produced water outside of the catalyst layer and prevent flooding
• Keep some water on surface for conductivity through the membrane
• Heat transfer during cell operation
• Helps provide enough mechanical strength to hold the MEA from extension caused by water absorbency
A hydrophobic treatment to GDL enables improved water transport. In PEM fuel cells, specifically water retention can result in lower power generation. These GDLs are treated with Teflon in order to make the material hydrophobic and improve water transport.
The purpose of the carbon Microporous Layer (MPL) is to minimize the contact resistance between the GDL and catalyst layer, limit the loss of catalyst to the GDL interior and help to improve water management as it provides effective water transport. MPL treatment is especially recommended for use with CCM (Catalyst Coated Membrane).
The Fuel Cell Store proudly carries the largest selection of carbon based Gas Diffusion Layers (GDL) in the world! If you know of a Gas Diffusion Layer we do not carry please contact us and let us know!
Refine Search
CT GF065 - 6.5mm Graphite Felt
CT GF065 is a graphite felt and a great electrode for Vanadium Redox Flow Batteries. It has a total ..
$95.00
CT GF020 - 1.5 - 3.5 mm Graphite Felt
CT GF020 is a graphite felt and is a great electrode for Vanadium Redox Flow Batteries (VRBs). It ha..
$68.00
CT GF030 - 2.5 - 4.5mm Graphite Felt
CT GF030 is a graphite felt and is a great electrode for Vanadium Redox Flow Batteries (VRBs). It ha..
$82.00
CT GDL210SHT - 210 μm Carbon Paper
CT GDL210SHT is a carbon paper with a Microporous Layer (MPL) and PTFE. It has a total thickness of ..
$215.00
CT GDS180S - 180 μm Carbon Paper
CT GDS180S is a carbon paper without a Microporous Layer (MPL). It has a total thickness of 180 ..
$73.00
Carbon Fiber Felt Variety Kit
The Carbon Fiber Variety Kit comes with a variety of four different gas diffusion layers made up of ..
$126.00
Stainless Steel Wire Cloth | Type 316 | 12" x 12"
Type 316 stainless steel bolting-grade woven wire cloth is especially suited for direct methanol fue..
$18.00
Electroformed Fine Nickel Wire Mesh - 11" x 11"
Electroformed fine wire mesh Nickel sheets are manufactured by a plating process that creates a fine..
$883.00
Titanium Screen
Grade 1 Titanium Screens are primarily used in electrolyzer stacks as part of the flow field or diff..
$61.00
Titanium Frit
Sintered Titanium Frit well suited for use in PEM Electrolyzers. These frits have a smooth, po..
$56.00
Titanium Fiber Felt
Titanium fiber felts are primarily used in electrolyzer stacks as the flow field or diffuser materia..
$50.00
High Porosity Titanium Fiber Felt
This is a high porosity sintered titanium fiber felt with good electrical conductivity. Titani..
$52.00
Thermally Platinized High Porosity Titanium Fiber Felt
This is a Thermally Platinized High Porosity Titanium Fiber Felt product (previously called High Por..
$81.00
Thermally Platinized Low Porosity Titanium Fiber Felt
This is a low porosity thermally platinized sintered titanium fiber felt product with good electrica..
$74.00
Ultra-thin Titanium Porous Transfer Layer
Ultra-thin titanium (Grade 2 based) porous transfer layer is one of the thinnest products on the mar..
$60.00









