Nafion™ N424, Teflon™ Fabric Reinforced

Brand: Chemours
Product Code: 1600004

Available Options

* Size (cm):

Qty: - +
   - OR -   

Chemours' (formerly DuPont) Nafion™ N-424 is a perfluorosulfonic acid cation exchange membrane combining outstanding chemical resistance with a strong polytetrafluoroethylene fiber reinforcement.  It is recommended for use in chlor-alkali production and a variety of electrolytic processes such as electroplating or electrolytic plating. Nafion™-424 is 0.38mm (0.015in) thick.

Laboratory Cell (45cm² active area)*

Cell Voltage (V) Current Efficiency (%) NaOH (%)
3.74 97 2

*Conditions: 3mm gap, DSA anode, steel cathode, 90°C

Nafion™ N-424 is shipped in the "DRY" H+ form.  "DRY" H+ membranes require simple pre-treatment in alkaline water.  Refer to Nafion™ Technical Bulletin No. 93-01 for "DRY" H+ membrane pre-treatment.

Please Note: The side marked CATH must be installed facing the cathode, otherwise, the membranes will be irreversibly damaged in use. If your membrane is not marked simply feel/look at both sides of the membrane, the smoother/glossier side will be the cathode side.

Chemours does not currently provide much information about Nafion™ N424 besides the information we have listed on this page.  The typical thickness of Nafion™ N424 is 0.015 inches.

Please contact us at for the SDS and technical data sheets (TDS).

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: