Nafion 1110

Brand: Chemours
Product Code: 590149-1

From $49.00

Available Options

* Size (cm):

Qty: - +
   - OR -   

Chemours (formerly DuPont) Nafion® 1110 membranes are non-reinforced cation exchange membrane films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release compared to the non-stabilized polymer – a sign of improved chemical durability. Nafion PFSA membranes are widely used for Proton Exchange Membrane (PEM) fuel cells and water electrolyzers. The membrane performs as a separator and solid electrolyte in a variety of electrochemical cells that require the membrane to selectively transport cations across the cell junction. The polymer is chemically resistant and durable.

Nafion 1110 is 254 micrometers (10 mil) thick.

Nafion 115, 117, and 1110 Membrane Properties Sheet

Handling and Storage of Chemours Nafion Perfluorinated Membranes

Nafion Membrane Technical Bulletin No. 93-01 for "DRY" H+ Membrane Pretreatment

Nafion Membrane Safety Handling Technical Information Bulletin T-01

Membrane Properties
Thickness 254 micrometers (10 mil)
Basic Weight (g/m²) 500
Tensile Strength - max. (MPa) N/A
Non-Std Modulus (MPa) N/A
Elongation to Break (%) N/A
Tear Resistance - Initial (g/mm) N/A
Tear Resistance - Propagating (g/mm) N/A
Specific Gravity (23 °C, 50% RH) N/A
Available Acid Capacity (meq/g) N/A
Total Acid Capacity (meq/g) N/A
Conductivity (S/cm) N/A
Membrane Hydrolytic Properties
Water content (% water) N/A
Water uptake (% water) N/A
Linear Expansion % increase - 50% RH, 23°C to water soaked 23°C 10.0 - Method: ASTM D 756
Linear Expansion % increase - 50% RH, 23°C to water soaked 100°C 15.0 - Method: ASTM D 756

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: