Categories

Nafion™ N324, Teflon™ Fabric Reinforced

Brand: Chemours
Product Code: 1600003

Price:
From $75.00

Available Options


* Size (cm):

Qty: - +
   - OR -   

Chemours' (formerly DuPont) Nafion™ N-324 is a perfluorosulfonic acid cation exchange membrane combining outstanding chemical resistance with a strong polytetrafluoroethylene fiber reinforcement.  It is recommended for use in chloroalkali production and a variety of electrolytic processes. Nafion™-324 is 0.28mm (0.011in) thick.

Performance
Laboratory Cell (45cm² active area)*

Cell Voltage (V) Current Efficiency (%) NaOH (%)
3.53 88 10
3.53 88 14
3.50 84 20

*Conditions: 3mm gap, DSA anode, steel cathode, 90°C

Form
Nafion™ N-324 is shipped in the "DRY" H+ form.  "DRY" H+ membranes require simple pre-treatment in alkaline water.  Refer to Nafion™ Technical Bulletin No. 93-01 for "DRY" H+ membrane pretreatment.

Please Note: The side marked CATH must be installed facing the cathode, otherwise, the membranes will be irreversibly damaged in use.  If your membrane is not marked simply feel/look at both sides of the membrane, the smoother/glossier side will be the cathode side.

DuPont / Chemours does not currently provide much information about Nafion™ N324 besides the information we have listed on this page.  The typical thickness of Nafion™ N324 is 0.011 inches.

Chemours Nafion™ N324 Technical Specifications

Handling and Storage of Chemours Nafion™ Perfluorinated Membranes

Nafion™ Membrane Technical Bulletin No. 93-01 for "DRY" H+ Membrane Pretreatment

Nafion™ Membrane Safety Handling Technical Information Bulletin T-01

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: