H-TEC's 1-Cell Rebuildable PEM Fuel Cell Kit contains a Proton Exchange Membrane Fuel Cell (PEMFC) that can be completely disassembled and then reassembled specially for education and research purposes. The PEM fuel cell can run in Hydrogen/oxygen or hydrogen/air operation modes. All the tools needed for assembly are included!
In a fuel cell, chemical energy is converted directly into electrical energy, i.e. without use of a combustion process. Hydrogen and oxygen (or ambient air) supplied from outside the process react electrochemically to form water, generating electrical current and heat in the process. The oxygen can be supplied in pure form, or in the form of ambient air.
• Cathode: 4e- + 4H+ + O2 → 2H2O
• Anode: 2H2 → 4H+ + 4e-
• Complete Reaction: 2H2 + O2 → 2H2O
• Power in Hydrogen and Oxygen Mode: 1 W
• Power in Hydrogen and Air Mode: 800 mW (with Oxygen Plate)
• Power in Hydrogen and Air Mode: 1.2 W (with Air Plate)
• Electrode Area: 16 cm²
• Generated Voltage: 0.4 - 0.96 V DC
• Requires Commercial distilled (deionised) water with a conductivity of < 2 μS/cm
• Dimensions (H x W x D): 3.9" x 3.14" x 3.07" (98 x 80 x 78 mm)
• Weight: 8 oz (225 g)
H-TEC1-Cell Rebuildable PEM Fuel Cell Kit Operating Manual, F107
Related Products
Flex-Stak Kit
Request Quote
Flex-Stak Assembled
Request Quote
Single Electrolyzer Kit
$158.00
Single Electrolyzer
$88.00
Fuel Cell Stack 3
$220.00
Direct Methanol Fuel Cell Flex-Stak
Request Quote
Flow Battery Flex-Stak
Request Quote
Variable Resistor
$54.00
Flex-Stak Electrochemical Cell
Request Quote