- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
Disassemble and reassemble your own fuel cell stack of individually connected cells with the Flex-Stak Hydrogen Air PEM Fuel Cell. The Flex-Stak comes in a 1-cell, 5-cell, 10-cell, 15-cell, and 20-cell stack configuration depending on your hydrogen power requirements. The ease of use makes it simple to scale the Flex-Stak to different power levels and integrate equipment such as sensors. The Flex-Stak fuel cell is an excellent learning tool that gives hands-on experience with promising fuel cell technology. Whether it’s advanced research on MEAs, creating your own fuel cell lab or conducting professional training, the Flex-Stak has a load of practical applications.
The Flex-Stak is a fully assembled, tested, and ready for use PEM Fuel Cell! Only a flathead screwdriver (1/4 inch) and torque wrench (<50 in-lb, 1/4 inch nut) are necessary to assemble the Flex-Stak so you can concentrate on creating your very own hydrogen powered applications. Digital torque screwdriver or digital torque wrench sets (with 0 to 100 in-lbs capability) can also be used to assemble the Flex-Stak hardware.
The Flex-Stak is a dismantable open-air cathode fuel cell that allows for users to input their own custom PEM MEAs for testing!
• MEA Active Area: 3.2 x 3.2cm (10cm²)
• MEA Membrane Area: 5.3 x 5.3cm
• Graphite Plate Overall Dimensions (L x W x D): 6.3 x 6.3 x 0.4 cm
• Recommended Torque Value: 8-10 inlbs
|Flex-Stak Properties||1 Cell||5 Cell||10 Cell||15 Cell||20 Cell|
|Nominal Output - Watts||0.25 to 0.35||3 to 3.5||6 to 7||9 to 11.5||12 to 14|
|Nominal Operating Voltage**||0.45 to 0.6||2.3 to 3||4.6 to 6||7 to 9||9.5 to 12|
|Hydrogen Consumption (cc/minute)||10.6||53||106||162||400|
* The provided output numbers are based on the forced air operation.
** The Flex-Stak nominal operating voltage per cell is typically around 0.45 to 0.6 V, but could vary between 0.4 and 0.9V per cell depending on how hard you are running the cell (i.e. pulling more current will result in a lower cell voltage, less current will have a higher cell voltage). Humidity of the H2 gas and stack temperature will also play a major role in the power output (or voltage or current) values.
Please note that the Flex-Stak Assembled does not come with guide dowels. 1/8" guide dowels are reccommended for assembly of the stack to aid in the alignment of the components.
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: