The Protium-25 is an advanced hydrogen PEM fuel cell that is designed for tomorrow's unmanned vehicles. The Protium Series is the flagship suite of fuel cell systems and the culmination of more than a decade of cutting edge R&D. Every Protium fuel cell is made of the best quality membrane electrode assemblies to ensure the highest power output in the smallest form factor.

Includes:


✔ Open cathode, air cooled, graphite bipolar plates
✔ 10-cells graphite plate fuel cell stack
✔ Electronic controller
✔ Purge solenoid valve, gas connectors and gas tubing
✔ Cooling fan with fan casing
✔ Stack power output and load connectors

Technical Specifications:

• Rated/Gross Power: 25/30W
• Rated/Gross Current: 4.2/5A
• Voltage Output: 6-9V DC
• Start-up Time: 5s
• Operating Ambient Temp.: (0,40]°C
• Operating Altitude: 1500m AGL
• System Weight: 360g
• Dimensions: 95 × 76 × 85 mm

Fuel Supply:

• Hydrogen Gas: Dry, 99.999% purity
• Delivery Pressure: 0.3-0.35 barg (4-5 psig)
• Fuel Consumption: 0.3L/min
• Gas Tubing: Silicon, ID 4mm
• Purge Control: Automated periodic purge via solenoid valve

Electronic Controller:

• Processor Board: Mini V1.0
• PCBA Dimension: 70 × 60 × 30 mm
• PCBA Weight: 56g
• Output Connector (Stack): Banana test connector receptacle and plug
• Output Connector (Load): Terminal block, 20A,12-22AWG
• External Power Requirement: 5V, 0.5A

Suggested Hybrid Lipo Battery

This fuel cell system requires the use of 3S LiPo battery (>50C discharge rated). The ultra-lightweight feature of the Protium-25 fuel cell system comes from the elimination of bulky and heavy external humidifiers needed for PEM fuel cell technology. An automated fuel cell stack conditioning protocol maintains the hydration of the membrane. During the stack conditioning event, fuel cell system briefly gets disconnected from the load (approximately 100 milliseconds). A small LiPo battery needs to be used to provide electrical energy to the load during the stack conditioning event.

Operation of the Fuel Cell - Hybrid LiPo Battery For UAVs

The ultra-lightweight Protium-25 fuel cell system works in tandem with the Hybrid LiPo battery. During the startup of the fuel cell, the Hybrid LiPo battery provides the electrical energy to initialize all the electronics. For the power demand up to 25 W, the electrical energy is solely supplied by the fuel cell stack. For events such as take off and emergencies that demand more than 25 W for short durations, LiPo battery provides all the electrical energy needed. For the most efficient use of this tandem power architecture, it is suggested that fuel cell stack to be used for cruising part of the flight and Hybrid LiPo battery to be used during take-off and short duration emergencies.

Protium-25 VI Curve

Protium-25 CAD Drawing

Protium-25 User Guide

Protium-25 Android App

Typical lead time of 4 - 6 weeks to be expected.

Fuel Cell Properties
Rated Power 25/30W
Operating Temperature 1 - 40 ºC
Weight 360g
Electronic Controller Mini V1.0
Electronic Controller Dimension 70 × 60 × 30mm
Hydrogen Max Consumption 0.3L/min
Hydrogen Pressure 0.3-0.35 barg (4-5 psig)
Cooling Air cooled
Voltage Range 6-9VDC
Hydrogen Purity Requirement Dry, 99.999% purity
Gas Tubing Requirement Silicon, ID 4mm
Start up time 5 s
Supply & Purge Control Automated periodic purge via solenoid valve
Type of Fuel Cell PEM, 10 cells
Dimensions 95 × 76 × 85mm

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Protium-25

  • SKU: 65130001
  • $2,147.00


Related Products

Flex-Stak Assembled
PEM Fuel Cell Hardware
Protium-150

Protium-150

$6,244.00

Protium-300

Protium-300

$8,033.00

GreenBox 2 - 100

GreenBox 2 - 100

$6,292.00

Protium-50

Protium-50

$2,556.00