- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Pressure Monitoring
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
The NTM Hydrogen Alarm System is a complete hydrogen monitoring solution designed to instantly improve safety in any environment. This comprehensive system includes the patented NTM SenseH2 hydrogen sensor, which boasts a highly sensitive, selective, and rapid response to low levels of hydrogen in the ambient air. When hydrogen concentration levels are detected within the Lower Flammability Limit (LFL), the system will produce audible and visual alarms to prevent further exposure to hydrogen and all hydrogen related accidents.
• Two mechanical relays providing 10 A at max switching voltage
• High sensitivity and selectivity to hydrogen
• Rapid response & recovery times
• 120-240 VAC power connection, or 12-48 VDC (be sure to ground your connection)
• Compact and rugged design
• Insensitive to CO and CH4
• Works in a variety of environments
• Durable and stable for long term operation
• Lowers cost of ownership
The NTM Hydrogen Alarm System is intended for use as a hydrogen gas detection and monitoring system in the range of 0.25 to 4% hydrogen in air.
• Stationary fuel cells
• Hydrogen refueling stations
• Hydrogen generation (electrolyzer) systems
• On‐site fuel reforming systems
• Laboratory monitoring
Composite Control Box: A Composite Control Box with connections for input of one or two hydrogen sensors, powered by 100VAC – 240VAC, or 12-48VDC, three LED indicator lights, dedicated alarm system circuit board, internal audible alarm, two internal sealed mechanical relays and built in diagnostics for LEDs, audible alarm and relays.
Sensor: The NTM SenseH2 Hydrogen Sensor is designed specifically for monitoring hydrogen. This ceramic sensor delivers a highly sensitive and rapid response to the presence of hydrogen in ambient air, creating a new level of safety and protection in your work environment. The compact and rugged design allows it to easily be incorporated into various systems, such as fuel cell powered vehicles, or function as a stand-alone room monitoring device.
Alarm Sensor Connector: 25 ft. shielded communication cable with connectors for control box and sensor. Longer cable lengths are available upon request.
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: