Laboratory Hydrogen Generator - G600

Brand: Proton Onsite
Product Code: 570252

Price:

$14,200.00

Qty: - +

- OR -

Add to Wish List
Add to Compare

0 reviews | Write a review

Description Specification Reviews (0)

The Hydrogen G600 bench-top stackable generator utilizes Proton Exchange Membrane (PEM) cell stack and desiccant dryer to produce UHP hydrogen for laboratory applications at 600 cc/min. The G600 Hydrogen Generator system is capable of sensing demand and adjusting production rate, while maintaining quiet operation.

This ultra-high purity, low mainteneance hydrogen generator is frequently used to supply hydrogen for GC and GC/MS or all commonly used combustion detectors used routinely with GCs. This Hydrogen Generator generates hydrogen on-demand at low pressures (up to 116 psi) as a safe and economical replacement for compressed gas storage.

Safe Operation: The purge airflow monitoring system and an automatic leak detection system assure the environment below LFL.

Efficiency: Water monitoring system (with purity monitor), system senses, auto-fill water level control and automatic production control guarantee the system running at optimal level.

Convenience: It is equipped with removable water feed tank, maintenance diary, report alarms and a touch screen display.

Features

✔ Auto fill water level control

✔ Compact size and quiet operation

✔ Water monitoring system including purity monitor

✔ Automatic production control

✔ Purge airflow monitoring system assures safe operation

✔ Including maintenance diary, report alarms, built-in touchscreen display

✔ Removable water tank

✔ Automatic leak detection system

Additional Features

✔ Additional Desiccant Cartridge

✔ Maintenance Diary

✔ Removable Water Feed Tank

✔ Report Alarms

✔ Touch Screen Display

Hydrogen Generator Properties
Flow Rate	600 cc/min
Output Pressure	3 to 8 barg (43 to 116 psig)
Purity	99.9995% (H2O < 5 ppmv, O2 < 1ppmv)
DI Water Supply	Deionized, ASTM Type II, > 1 Meg Ohm-cm (<1 microSiemen/cm) < 0.5 ppm, Total Dissolved Solids
DI Water Feed Pressure Spec for Auto-Fill	0.7 to 1.4 barg (10 to 20 psig)
Water Consumption Rate	36 cc/hr, 0.86 L/day
Power Consumption Rate	< 250 W
Electrical Supply	120 - 230 VAC, Auto Ranging, 50/60 Hz
Operating Temperature	40°F to 104°F (5°C to 40°C)
Storage/Transport Temperature	40°F to 140°F (5°C to 60°C)
Dimensions	14.5” (H) x 21.75” (D) x 9” (W)
Environmental Moisture	80% RH, non-condensing
Max Altitude	2000 m/ 6560 ft above sea level
External Di Water Tank Capacity	2.75 L