Hydrogen Generator - S40

Brand: Nel Hydrogen
Product Code: 58150700

Qty: - +
   - OR -   

The S Series hydrogen generation systems produce up to 1.05 Nm3/hr (40 scf/hr) of ultra-high purity hydrogen gas for applications such as materials processing, power plant generator cooling and electronics applications.

With a production rate of 20 or 40 scf/hour, the compact S Series hydrogen generator produces the equivalent of four cylinders of better-than-UHP grade hydrogen every day. Proton Onsite hydrogen generation systems are helping many industries eliminate costs associated with delivery and use of hydrogen.

Hundreds of these hydrogen generator systems have been delivered to customers in electric power generator cooling, materials processing, electronics/ semiconductor fabrication, scientific hydrogen applications, for meteorological balloon filling, and for H2 fueling systems and fuel cell development.

* All of the units in the S Series can be provided in a high pressure version if desired.



*Optional external Desiccant dryer/polisher available to increase purity to 99.9999+% and reduce water content to < 1 ppm

Hydrogen Generator Properties
Net Production Rate 1.05 NM3/hr; 40 SCF/hr; 18.8 SLPM; 2.27 kg/24hr
Delivery Pressure - Nominal 13.8 barg (200 PSIG)
Power Consumed per Volume of H2 Gas Produced 6.7 kWh / NM3 17.6 kWh/ 100 ft3
Purity 99.9995% (Water Vapor < 5 ppm, -65°C (-85°F) Dewpoint, N2 <2 ppm, O2 < 1PPM, All other undetectable)
DI Water Supply ASTM Type II Deionized Water required, < 1 micor Siemen/cm (>1 megOhm-cm) ; ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (>10 megOhm-cm)
Required Water Pressure 1.5 to 4 barg (21.8 to 58.0 PSIG)
Water Consumption Rate 0.94 L/hr (0.25 gal/hr)
Electrical Supply 205 to 240 VAC, single phase 50 or 60 Hz
Cooling Air-cooled; Ambient Air, 5°C to 40°C (41°F to 104°F)
Max. Heat Load from System 4.3 kW / 14,763 BTU/hr
Max Altitude 1520 m (5000 ft)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: