Isolated DC-DC Converter (360W, 24.5 VDC)

Brand: Analytic Systems
Product Code: 1031006


Qty: - +
   - OR -   

This Isolated DC-DC converter is suitable for applications requiring galvanic isolation between the input and the output and provides a highly regulated output DC voltage of 24.5 Volts for an input DC voltage range of 20-35 Volts and rated output current of 15 Amps (at 35 Volts input).  Features of this isolated DC-DC converter include compact housing, fold-back current limiting and protection against short circuit, overheating, over-voltage and reverse polarity connection

  • Mobile Applications
  • Buses
  • Marine Vehicles
  • Heavy Trucks
  • CB Radios
  • 24 Volt Lightning Systems
  • AM/FM Sound Systems
  • Advanced switch mode design
  • Current limited
  • Compact and lightweight
  • High efficiency
  • Short circuit protected
  • 1/4” push-on flat pin connectors
Electrical Input
Input to Output Isolation Yes. > 400 V RMS
Input Voltage Range 20 - 35 VDC
Fuse Specifications
External Input Side Fuse 32V, 25A
External Output Side Fuse 32V, 15A
Wire Size
Input Wire (Up to 6') AWG #10
Output Wire (Up to 10') AWG #10
Electrical Output
DC Voltage 24.5 VDC
Rated Current 15A (The output current indicated is the maximum current at the maximum input voltage)
Ripple & Noise (max.) <50 mV RMS
Converter General
Cooling By temperature controlled fan
Humidity Max 95%
Input/Output Connections Quick connect male 6.3mm / 1/4" flat blade
Operating Temperature -20°C to +30°C, De-rate linearly to zero at 70°C -4°F to 86°F, De-rate linearly to zero at 158°F
Peak Efficiency 85%
Protections Overload/ short circuit on the output side, over voltage on the output side, over voltage/ transients on the input side, reverse polarity on the input side, over heating.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: