• Isomolded Graphite Plate - 6" x 6"

These Isomolded Graphite Plates can be machined on both sides.  Isomolded plates are made out of very fine grain, high strength and density graphite.  These plates are Isostatically pressed.

Size - 6.0" x 6.0"

Thickness Tolerance +/- 0.001"

Length and Width Tolerance +/- 0.005"

Plate Physical Properties
Plate Grade Fuel Cell Grade (GM-10)
Bulk Density 0.066 lb/in^3 (1.82 gr/cm^3)
Hardness 65 psi (65 kg/mm²)
Compressive Strength 18500 psi (127.6 mPa)
Flexural Strength 8400 psi (57.9 mPa)
Particle Size .0004 in (0.00102 cm)
Porosity 12% VOL
CTE 3.3 in/in °F x 10^-6 (5.9 Microns/m °C)
Plate Electrical Properties
Resistivity 5.5 ohm*in*10^-4
Other Plate Properties
Thermal Conductivity 48 BTU/(h.ft² °F/ft) (83 W/(m².K/m))
Ash 0.05%
Temperature (Air) 750°F (399°C)
Temperature (Inert) 5000°F (2760°C)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Isomolded Graphite Plate - 6" x 6"

  • SKU: 36090019
  • Starting From $82.00


Options

Reset options

Related Products