Liquid Electrolyte Fuel Cell Hardware - 25cm²

Product Code: 72108112


Qty: - +
   - OR -   

The Liquid Electrolyte fuel cell is equipped with a reservoir for the continuous supply of liquid fuel (i.e. electrolyte) to electrodes.  It provides an easy assembly structure to install the electrode and fill the liquid fuel.  Since the fuel (electrolyte) is liquid, the solution is soaked in a matrix so that t it can be contained in the fuel cell.

Flow fields machined in to the graphite plates allow the flow of reactants and provide excellent electrical contact to the matrix.

You can also purchase the matrix assemblies which consist of Pt Catalyst with silicone carbide coating – carrying hydrogen ions from the anode to the cathode.

Liquid Electrolyte Fuel Cell Hardware Includes:

✔ Machined graphite separator plates
✔ Gold plated current collectors
✔ Banana plugs for monitoring voltage
✔ Belleville washer
✔ Built-in silicon rubber heaters (120 watt) for maintaining cell temperature
✔ Nylon fitting/SS nut for gas tight connection to 1/4” tubing

Technical Specifications:

• Gaskets: Silicone (standard)
• Size At (H x W x L): 11cm x 9.5cm x 4.5cm
• Weight (pounds): 7
• Normal Operating Temp: 100 to 200°C

Schematic of the Fuel Cell Hardware's Components:


Fuel Cell Hardware is also available with other Flow Field Designs Upon Quotation

  • Column / Pin Type
  • Serpentine
  • Straight Channel

General lead time of two weeks to be expected.


1. Through-Bolt Assembly Design
• Low Tightening Force Required
• Create Uniformed Force Distribution: 5in/lb
2. Implement Pinch Adjustment Mechanism
• Capable of Applying Torque Equally to the Bolts
• Contain Flat Gaskets with High Precision Thickness
3. Fuel Cell Grade Graphite Plate
• Gas Non Permeable / Excellent Chemical Resistance
• High Electrical/Thermal Conductivity and Mechanical Strength
4. Adaptable to Varied Flow Field Plate Design
• Current Collector Plate
• Gold Plated Plate – for corrosion resistance
5. Thermocouple Insert Hole
• Reach Thermocouple at Center of Fuel Cell Test Hardware
• Precisely Control and Monitor the Temperature
• Closest to the MEA
6. Voltage Measurement Banana Plug
• For Exact Measurement of Cell Voltage (using the highly electrically conductive graphite plate)
• Eliminate Voltage Drop due to Contact Resistance
7. Silicone Rubber Heater
• Provide Highest Watt Density
• Maintain Uniform Cell Temperature (using the highly thermally conductive graphite plate)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: