- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Hydrogen Drone
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
- Oxygen Devices
Chemours Nafion™ PFSA polymer dispersions are made from chemically stabilized perfluorosulfonic acid (PFSA) / polytetrafluoroethylene (PTFE) copolymer in the acid (H⁺) form, and are available in several polymer content and dispersant compositions. Typical uses include fabrication of thin films and coating formulations for fuel cell membranes, catalyst coating, sensors, and a variety of electrochemical applications.
Fuel Cell Applications: Nafion™ D520 Dispersion (a diluted, liquid form of the same chemical used for a PEM fuel cell membrane) drastically reduces the amount of platinum needed as a catalyst by exposing a larger fraction of the platinum to the hydrogen gas. Also, the Nafion™ acts as a binding agent to hold the platinum, membrane, and gas diffusion layer together.
Nafion™ Dispersion D520, D521, D2020, and D2021 are considered hazardous items under DOT and IATA regulation. Dispersions over 30 mL will incur a hazardous fee to accommodate the regulations based on the final shipping location.
Please note that dispersions contain solvents that may compromise the seals of the bottles if the solvents are left in direct contact with the lids for long periods of time. We recommend always storing the bottles in an upright orientation as soon as the shipment is received to lessen the likelihood of inadvertent leakage.
Please contact us if you plan to order over 1 Liter of various dispersions.
|Nafion PFSA Polymer Dispersions Properties|
|Equivalent Weight (EW)||1000|
|Polymer Content (wt. %)||5.0 min and 5.4 max|
|Water Content (wt. %)||45 ± 3|
|VOC Content (wt. %)||50 ± 3|
|VOC Content (wt. %) - 1-Propanol||48 ± 3|
|VOC Content (wt. %) - Ethanol||< 4|
|VOC Content (wt. %) - Mixed Ethers and Other VOCs||< 1|
|Specific Gravity||0.92 - 0.94|
|Available Acid Capacity (meq/g, H+ polymer basis)||> 1.00|
|Total Acid Capacity (meq/g, H+ polymer basis)||1.03 - 1.12|
|Viscosity (cP; at 25C and 40 sec-1 Shear Rate)||10 - 40|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: