- Fuel Cell Cars
- Education
- Fuel Cell Stacks
-
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- Clearance
- STEM Education
Nafion™ NE1035
Please note that NE1035 has been discontinued by Chemours and only limited supplies are available for the time being.
Nafion™ Membrane NE1035 is used to separate the anode and cathode compartment of Proton Exchange Membrane fuel cells, batteries and water electrolyzers. Nafiion 1035 has a low Equivalent Weight (1000EW) and a higher conductivity, making it particularly suitable for energy storage applications, such as batteries, Direct Methanol Fuel Cells (DMFC) and Electrolysis applications. Nafion™ NE1035 is a 89 micrometer (3.5 mil) thick cation exchange membrane.
Chemours Nafion™ NE1035, EW1000 membranes are non-reinforced films based on chemically stabilized perfluorosulfonic acid/PTFE copolymer in the acid (H+) form. The physical properties remain the same for the chemically stabilized membranes, which exhibit substantially lower fluoride ion release compared to the non-stabilized polymer – a sign of improved chemical durability. Nafion™ PFSA membranes are widely used for Proton Exchange Membrane (PEM) fuel cells and water electrolyzers. The membrane performs as a separator and solid electrolyte in a variety of electrochemical cells that require the membrane to selectively transport cations across the cell junction. The polymer is chemically resistant and durable.
Please contact us at sales@fuelcellstore.com for the SDS and technical data sheets (TDS).
Membrane Properties | |
Thickness | 89 micrometer (3.5 mil) |
Tensile Strength - max. (MPa) | 38 Mpa at 10% RH, 23°C and 19 Mpa at 369 Mpa at water soaked, 23°C |
Non-Std Modulus (MPa) | 369 Mpa at 10% RH, 23°C and 90 Mpa at 369 Mpa at water soaked, 23°C |
Elongation to Break (%) | 148% at 10% RH, 23°C and 133% Mpa at 369 Mpa at water soaked, 23°C |
Specific Gravity (23 °C, 50% RH) | 2 |
Available Acid Capacity (meq/g) | 1.0 min |
Total Acid Capacity (meq/g) | 1.03 to 1.12 |
Conductivity (S/cm) | 0.106 |
Membrane Hydrolytic Properties | |
Water content (% water) | ~5% |
Water uptake (% water) | 43% |
Write a review
Your Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: