Blog Search

Zero-gap electrolyzers are similar to fuel cells in design because the heart of the electrolyzer consists of two electrodes pressed against a membrane. These electrolyzers are called “zero-gap” because there is no gap between the cathodes, anodes, and the electrolyte. This design decreases the distance for ion transport because the layers are pressed or bonded together. The zero-gap CO2 electrolyzers can achieve high current densities (≥100 mA/cm2) by delivering gaseous CO2 to the cathode. The efficiency of these electrolyzers depends upon the catalysts used, the operating conditions, and o..

The fuel cell electrode layer is made up of the catalyst and porous gas diffusion layer. When the fuel in the flow channels meets the electrode layer, it diffuses into the porous electrode. The reactant travels to the catalyst layer where it is broken into protons and electrons. The electrons move to the...

The electrolyte layer is essential for a fuel cell to work properly. In PEM fuel cells (PEMFCs), the fuel travels to the catalyst layer and gets broken into protons (H+) and electrons. The electrons travel to the external circuit to power the load, and the hydrogen protons travel through the electrolyte until it reaches the cathode to combine with oxygen to form...

Electrolyzers use electricity to break water into hydrogen and oxygen. The electrolysis of water occurs through an electrochemical reaction that does not require external components or moving parts. It is very reliable and can produce ultra-pure hydrogen (> 99.999%) in a non-polluting manner when...

The fuel cell electrode is a thin, catalyst layer where electrochemical reactions take place. The electrodes are usually made of a porous mixture of carbon-supported platinum and ionomer. To catalyze reactions, catalyst particles have contact to both protonic and electronic conductors. There also must be passages for...