Polypropylene (PP) Porous Mesh - 30.5 x 30.5cm

Polypropylene (PP), is a thermoplastic polymer providing good chemical and heat resistance at a reasonable cost. Polypropylene mesh product is rugged and have excellent resistance to many chemical solvents, bases and acids. Tolerances vary with apertures (hole sizes), weights, thicknesses and widths.  Porous PP mesh is suitable for low temperature applications that require turbulence promotion, mixing, physical separators for electrodes in fuel cells, electrolyzes, and batteries, and numerous other uses. 

This product is supplied in the 12" by 12" (30.5cm by 30.5cm) dimensions.  Other major specifications for each grade are given in table below.

 

 

Applications that can benefit:

-Flow through electrochemical cells

-Electrochemical cells or non-electrochemical cells that require physical separator or plastic separators between the anode and cathode electrodes

-Electrochemical or non-electrochemical cells that require turbulence promoter mesh

-Non-electrical plastic separation of electrodes for wet-chemistry experiments

-Securing membrane samples for pre-treatment or cleaning

-Securing membrane or catalyst coated electrodes for their curing or drying in benchtop ovens or muffle furnaces

-Drying fuel cell electrodes, battery electrodes, etc.

 

A typical lead time of 2-3 weeks to be expected for this product.

Write a review