- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
This polypropylene turbulence promoter mesh can be used with acetone, citric acid, and ethyl alcohol. This mesh provides good to excellent resistance to non-oxidizing acids and bases, fats, and most organic solvents.
|Mesh Size*||Opening Size||Wire Diameter||Open Area (%)||Max Temperature (F)||Color|
|6 x 6||0.1323"||0.0394"||60%||190°||White|
|9 x 9||0.0787"||0.0315"||51%||190°||White|
|23 x 23||0.0280"||0.0173"||41%||190°||White|
|35 x 35||0.0165"||0.0134"||30%||190°||White|
*The mesh size refers to the number of openings per linear inches. For example, 6 x 6 mesh size would mean that there is 6 opening in 1 linear inch in x- (width) or y-direction (length) or a total of 36 openings per 1 square inch area (1 inch by 1 inch). The stated mesh size numbers are approximate values.
Width of the polypropylene turbulence promoter mesh products as follows:
6 x 6 mesh comes with a width of 55"
9 x 9 mesh comes with a width of 54"
23 x 23 mesh comes with a width of 55"
35 x 35 mesh comes with a width of 54"
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: