Our DC/DC converters are designed to regulate the output voltage from the fuel cell stack to the final load so that you can get steady, reliable operation from your fuel cell. This 25W converter accepts input voltages from 9.2 - 18 VDC and delivers a regulated 12 VDC output at up to 2.1 A.

Applications

Electronic equipment
Hobby equipment
Low power lighting solutions

Features

2:1 wide input range
Protections:Short circuit/Over load/Over voltage
1500VDC I/O isolation
Built-in EMI filter, low ripple noise
100% full load burn-in test
Fixed switching frequency at 83KHz
Low cost
High reliability
1 year warranty

Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldEditEdit in GingerEdit in Ginger×

Electrical Input
DC Current	1.6 A/24V
Efficiency (Typ.)	72%
Voltage Range	9.2 to 18 VDC
Electrical Output
Current Range	0 to 2.1 A
DC Voltage	12 V
Line Regulation	+/- 0.3%
Load Regulation	+/- 0.3%
Rated Current	2.1 A
Rated Power	25.2 W
Ripple & Noise (max.)	120 mVp-p
Setup, Rise, Hold Time	2.5s, 50ms, at full load
Voltage ADJ. Range	11 to16 VDC
Voltage Tolerance	+/- 1.0%
Converter General
Humidity	20% to 90% RH non-condensing
Operating Temperature	-10°C to +60°C (Refer to output load derating curve)
Protections	Over Load: 105% to 150% rated output power, Protection type: Fold back current limiting, recovers automatically after fault condition is removed. Over Voltage: 16.8% to 20V/10% load, Protection Type: Hiccup mode, recovers automatically after fault condition is removed.