C10 Hydrogen Generation System

Brand: Nel Hydrogen
Product Code: 58151200

Qty: - +
   - OR -   
The C10 Hydrogen Generation System produces 10 Nm³/hr by utilizing Proton Exchange Membrane (PEM) cell stacks and PSA technology to produce ultra-high purity hydrogen for various applications; some of which include materials processing, semiconductor fabrication, hydrogenation, energy storage, etc.  These generators achieve extreme purity and composition certainty with minimal maintenance.  This series benefits hydrogen users by improving supply reliability and site safety, while also reducing hydrogen storage space.
The C Series Hydrogen Generation Systems come in two integrated, automated, site-ready enclosures.  Dual-mode Operation (Select-able): 
  • Load Following mode automatically adjusts output 0-100% to match demand.
  • Tank Filling mode operates with power-conservation mode during standby.
✔ Auto fill water level control
✔ Water monitoring system including purity monitor
✔ Automatic production control
✔ On board DI water system
✔ Factory Matched Cooler / Chiller
✔ Dew Point Meter
✔ Outdoor Operation Package
✔ Dedicated Data-logging computer
✔ Automatic H2 leak detection system
Hydrogen Generator Properties
Flow Rate 10 Nm³/hr at 0°C, 1 bar
Output Pressure 30 barg (435 PSIG)
Purity 99.9995%
DI Water Supply ASTM Type II Deionized Water required, < 1 micro Siemen/cm (>1 megOhm-cm) /// ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (>10 megOhm-cm)
DI Water Feed Pressure Spec for Auto-Fill 1.0 to 4.1 barg (10 to 60 PSIG)
Water Consumption Rate 9 L/hr (2.4 gal/hr)
Power Consumption Rate 6.2 kWh/Nm³ / 16.3 kWh/100 ft³ / 68.9 kWh/kg
Electrical Supply 342 to 456 VAC, 3 phase, 50 Hz /// 432 to 528 VAC, 3 phase, 60 Hz
Ingress Protection Rating IP66 for Power Supply Enclosure. IP56 for Electrolyzer Enclosure. IP24 for Disconnect Box (Indoor).* IP56 for Disconnect Box (Outdoor).*
Max Heat Load 33.5 kW (114,307 BTU/hr) (9.6 tons refrigeration)
Operating Temperature +5°C to 40°C (41°F to 104°F)
Dimensions Electrolyzer Enclosure: 2388 mm x 914 mm x 2007 /// Power Supply Enclosure: 1880 mm x 914 mm x 2007 mm
Max Altitude 2000 m (6562 ft)
Weight 2041 kg (4500 lbs)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: