PTFE Porous Mesh - 30.5 x 30.5cm

These PTFE porous mesh products are manufactured by slitting plastic sheet stock in a controlled pattern, then stretching or expanding the width to produce the designated nominal aperture (hole) size. Tolerances vary with apertures (hole sizes), weights, thicknesses and widths.  Porous PTFE mesh is suitable for high temperature applications and highly caustic environments. It's also chemically resistant, non-stick, and inherently UV stable (UV radiation passes straight through causing no interactions.) Some other features include:

-Non toxic

-Low-friction

-High anti-adhesiveness

-High dielectric properties

-Suitable for continuous use from -100°C up to 260°C (500°F)

 

    

    

 

This product is supplied in the 12" by 12" (30.5cm by 30.5cm) dimensions.  Other major specifications for each grade are given in table below.

 

 

Applications that can benefit:

-Flow through electrochemical cells

-Electrochemical cells or non-electrochemical cells that require physical separator or plastic separators between the anode and cathode electrodes

-Electrochemical or non-electrochemical cells that require turbulence promoter mesh

-Non-electrical plastic separation of electrodes for wet-chemistry experiments

-Securing membrane samples for pre-treatment or cleaning

-Securing membrane or catalyst coated electrodes for their curing or drying in benchtop ovens or muffle furnaces

-Drying fuel cell electrodes, battery electrodes, etc.

 

A typical lead time of 2-3 weeks to be expected for this product.

Write a review