- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
- Summer Sale
XICAT™ Membrane Electrode Assemblies (MEA) are highly durable and they provide ultra-high performance assemblies for use in electrochemical applications due to the use of ultra-thin composite membranes.
MEA PEM-Aquivion-720-10μm-0.5mgPt-Cloth product is comprised of the following sub-components: 10 micrometers thick PEM-Aquivion (EW 720) composite membrane and carbon cloth based gas diffusion electrodes with 0.5 mg/cm2 loading of 60% Pt/C catalysts both for anode and anode.
Xergy has the largest selection of composite proton exchange membranes (C-PEM) and proton exchange ionomers (PEI) and composite anion exchange membranes (C-AEM) and anion exchange ionomers (AEI) to select from for the XICAT MEA design. C-PEMs/PEIs for the XICAT MEAs are available from Dyneon™, Aquivion™, and Nafion™ perfluorosulfonic acid (PFSA) ionomers. C-AEMs/AEIs are available from Durion™ and Pention™ ionomers. The standard MEA is a 5-layer construction with a membrane sandwiched between a gas diffusion electrode and catalyst layer. A second MEA structure is a 3-layer construction known as a catalyst coated membrane (CCM), in which the catalyst is applied directly to the membrane and there is no gas diffusion layer.
|Active Area||Membrane Area|
|2.2cm x 2.2cm||10.0cm x 10.0cm|
|5.0cm x 5.0cm||10.0cm x 10.0cm|
|7.1cm x 7.1cm||13.0cm x 13.0cm|
|10.0cm x 10.0cm||13.0cm x 13.0cm|
These are developmental products that are currently being offered to researchers for their various electrochemical applications and hence, the amount of experimental data is is scarce and Xergy team hopes that customers purchasing these products would provide some feedback in order to further improve their electrochemical performances.
Please note that a current lead time of 4 - 6 weeks is to be expected.
|MEA Type||H2/Air PEMFC|
|Membrane Type||PEM-Aquivion composite membrane|
|Membrane Thickness||10 micrometers|
|Anode Loading||0.5 mg/cm²|
|Anode Catalyst||60wt% Pt on Vulcan (Carbon)|
|Cathode Loading||0.5 mg/cm²|
|Cathode Catalyst||60wt% Pt on Vulcan (Carbon)|
|Gas Diffusion Layer||Carbon Cloth with MPL|
|Gas Diffusion Layer Type||Woven Carbon Fiber Cloth|
|Gas Diffusion Layer Thickness||.365 mm (365 microns)|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: