Silicon Gasketing - 12" x 12"

Product Code: 590363

Price:
From $57.00

Available Options


* Thickness (in) :

Qty: - +
   - OR -   

Thin gauge 12 x 12 inch Silicon Rubber Gasketing for use in fuel cell fixtures.  Like other silicon, this rubber stays flexible over a wide temperature range, but its softness gives it better conformability than other rubber.  A peel-off protective masking keeps this rubber free from dust and debris. Width and length tolerances are ±1/4".  Durometer tolerance is ±5.

Teflon and fiberglass reinforced Teflon are used in high temperature applications such as High Temperature Polymer Electrolyte Membrane Fuel Cells (HT-PEMFC) and Phosphoric Acid Fuel Cells (PAFC).

HT6135 Silicon gasketing is a solid silicone elastomer.  Silicone elastomers exhibit a natural shrinkage when the carrier or liner is removed.  Thickness measurements do not include carrier or liner.

Gasket Properties
Durometer 35A (soft) ±5
Thickness Tolerance ± 1/4 inch
Tensile Strength (psi) 800
Temperature Range -80°F to +425°F

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: