• 0.2 mg/cm² 20% Platinum on Vulcan - Carbon Cloth Electrode (W1S1010)

A low-cost electrode utilizing a woven carbon cloth substrate and a 20% Platinum on Vulcan Carbon support catalyst.  This low loading is designed for cost sensitive applications and is suitable for electrochemical systems needing low amounts of Platinum to support the reaction.  This electrode is perfect for Hydrogen/Air Fuel Cell applications where the extra cost of the higher loading GDE may not be justified. The Gas Diffusion Layer (GDL) used is a standard carbon cloth with MPL which is 365 microns thick. Other GDL materials are also available by custom request, as are custom sizes and loadings.

Includes a Nafion Post Coat for improved water management and adhesion to the membrane.

0.2 mg/cm² 20% Platinum on Vulcan - Carbon Cloth Electrode (W1S1009) has been discontinued and was permanently replaced by 0.2 mg/cm² 20% Platinum on Vulcan - Carbon Cloth Electrode (W1S1010).

There is a limited quantity of this product is available.  Please contact us before you place an online order for this product.

Catalyst Properties
Catalyst Type 20% Platinum on Vulcan (Carbon)
Loading 0.2 mg/cm²
Gas Diffusion Layer Properties
Material Type Woven Carbon Fiber Cloth
Thickness 0.365 +/- 0.015 mm (365 +/- 15 microns)
Basic Weight (g/m²) 175 +/- 5
Air Permeability (s) < 55
Electrical Resistivity (through plane) < 14 mΩcm²
Microporous Layer Yes, on catalyzed side

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

0.2 mg/cm² 20% Platinum on Vulcan - Carbon Cloth Electrode (W1S1010)

  • Request Quote


Related Products