- Fuel Cell Cars
- Fuel Cell Stacks
Fuel Cell Testing
- - Fixed Testing Systems
- - Liquid and Gas Delivery Systems
- - Fuel Cell Testing Hardware
- - Modular Testing Systems
- - Vacuum Tables and Temperature Controllers
- - Electronic Measurement and Control
- - Stack Humidification Systems
- - Ion Exchange Filters
- - Fuel Cell Testing Components
- - Portable Generators
- - Electrochemical Experiments
- Fuel Cell Components
- Hydrogen Equipment
- Hydrogen Drone
- Power Devices
- Solar Power
- Hydro Power
- Wind Power
- Bioenergy Power
- Lab Accessories
- STEM Education
- Oxygen Devices
Cut your own gaskets out of this 12 inch x 12 inch sheet of high-performance EPDM (Ethylene Propylene Diene Monomer) Rubber. Provides excellent seals for both Hydrogen and Direct Methanol fuel cells.
With greater strength than standard Weather-Resistant EPDM Rubber, these sheets provide better shock-absorbing qualities and longer life. They are resistant to sunlight, ozone, and water.
EPDM Rubber is peroxide cured for increased temperature resistance.
Meet ASTM D2000 CA.
|Durometer||50A (medium) ± 5|
|Thickness Tolerance||At 1/32" ±0.010", At 1/16" ±0.016", At 3/32" ±0.016", At 1/8" ±0.020", At 3/16" ±0.031", At 1/4" ±0.031"|
|Tensile Strength (psi)||1500|
|Temperature Range||-55°F to +300° F|
Write a review
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: