Hydro-LAT 2400 - Carbon Cloth with Hydrophilic MPL

Brand: Fuel Cell Store
Product Code: 11070052

From $182.00

Available Options

* Size (cm):

Qty: - +
   - OR -   

Fuel Cells ETC's Hydro-LAT 2400 is a carbon cloth based gas diffusion layer (GDL) with with a high surface area carbon-based microporous layer on each side. Hydro-LAT GDL has been engineered to have excellent hydrophilic (i.e., meaning completely wettable) microporous layer (MPL) for applications that demands hydrophilicity or wettability for various electrochemical or chemical reactions. Thickness is ~450-500 µm.

Hydro-LAT 2400: Properties and Advantages

Certain electrochemical devices demand that either the electrolyte component wets the electrode surface or the MPL retaining the by-product water to maintain the membrane's hydration, or any other relevant needs. These applications can also benefit from a high surface area MPL that is hydrophilic or wettable. All of the current commercially available GDLs with MPL have teflonization not only of the substrate, but also of the microporous layer. Presence of PTFE in the MPL limits the use of these high surface area gas diffusion layer products for such novel applications.  

Hydro-LAT 2400 gas diffusion layer is comprised of a carbon cloth base fabric and a hydrophilic MPL.  In the MPL slurry, high surface area carbon black nanopowder is initially mixed with a hydrophilic binder and various other organic and aqueous solvents. The slurry is then coated on the base fabric.  A second functionality of the proprietary hydrophilic binder is to facilitate the ionic conductivity through the entire MPL thickness since it is a functionalized material with excellent cation or proton conductivity. The hygroscopic nature of the binder brings an excellent wettability of the MPL section compared to any other commercial GDL products currently available. Hydrophilic MPL is coated on both sides of the substrate.

The above-mentioned features make Hydro-LAT ideally suitable for batteries containing aqueous or organic electrolytes, passive fuel cells that operates at extremely low current densities, electrochemical capacitors, super capacitors, electrochemical sensors, and numerous other electrochemical devices.

It is not recommended to use this product in typical PEM fuel cells because the high degree of hydrophilicity will make it impossible to remove the by-product water away from the membrane/catalyst interface and will result in flooding at the cathode or anode.

A typical lead time 1-2 weeks to be expected for this product.
Gas Diffusion Layer Properties
Material Type Woven Carbon Cloth Fiber
Thickness ~450-500 micrometers
Microporous Layer Yes, on both sides (hydrophilic)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: